User manual FELLOWES QUASAR 500

[. . . ] www. fellowes. com Let our experts help you with a solution. Always call Fellowes before contacting your place of purchase. 12mm 14mm 2 SET UP 1 2 3 4 1. Ensure the machine is on a stable surface. 2. [. . . ] Check waste tray is empty and correctly fitted. 3. Ensure the wire closing lever is pushed backwards. 4. Lift the punch handle to its upright position. BEFORE YOU BIND 1 2 3 1. Select the correct wire comb diameter using the comb storage tray. 2. Hang the selected wire comb onto wire comb support. 3. Test punch scrap sheets to check edge guide setting. STEPS TO BIND 1 Max 15 30 (80gsm) 2 3 4 1. Punch sheets in small batches that do not overload the machine or user. 2. For best results empty the tray regularly. STORAGE Lower the punch handle to the horizontal position. Lower the lid. TROUBLESHOOTING Problem Punched holes are not central Machine will not punch Punch holes are not parallel to edge Cause Edge guide not set Blockage Debris is stuck below dies Solution Adjust edge guide until hole pattern is correct Check waste tray in empty. Check for blockage to paper entry Take stiff cardboard and slide into the paper entry. Move the cardboard sideways to release any stray clippings into the waste tray Adjust edge guide and test punch scrap sheets until correct Punch plastic covers with paper sheets. Reduce number of sheets being punched Check waste tray is empty and `burst feature' is closed Check closure of wire comb. Place into closing mechanism and improve binding closure. Partial holes Damaged hole edges Waste tray leaks Sheets fall out of document Sheets not correctly aligned to punch pattern Possibly overloading the machine Waste tray is not correctly inserted or `burst feature' has activated Wire comb is not closed enough WARRANTY Fellowes warrants all parts of the binder to be free of defects in material and workmanship for 2 years from the date of purchase by the original consumer. If any part is found to be defective during warranty period, your sale and exclusive remedy will be repair or replacement, at Fellowes' option and expense, of the defective part. [. . . ] If any part is found to be defective during warranty period, your sale and exclusive remedy will be repair or replacement, at Fellowes' option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorised repair. Any implied warranty, including that of merchantability or fitness for particular purpose, is hereby limited in duration to the appropriate warranty period set forth above. [. . . ]