Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FENDER BXR 60. We hope that this FENDER BXR 60 user guide will be useful to you.
Lastmanuals help download the user guide FENDER BXR 60.
Detailed instructions for use are in the User's Guide.
[. . . ] The rugged power amplifier is designed to give years of reliable service under all conditions. It is equipped with our exclusive DELTACOMPTM adaptive compressor system. With DELTACOMPTM, it is practically impossible to clip (distort) the power amplifier. [. . . ] TAPE IN - Plug-in connection for any line level (500mV) stereo or mono signal. This signal is mixed into the power amp along with the instrument signal from the preamp. It has fixed gain and is unaffected by any of the front panel controls; however the signal will be affected by any device inserted between the PREAMP OUT (item G) and the POWER AMP IN (item H). It is useful for patching in a CD or tape player, rhythm machine or other signal source to be used as an accompaniment for practice or performance. The output level control of the external signal source is used to control its own volume while the front panel VOLUME (item D) control is used for the instrument in order to obtain a balance.
G.
PREAMP OUT jack -This jack provides an unbalanced mono output signal from the preamp. This output can be used with the POWER AMP IN jack (item H) as a patch point for mono effects devices. It can also be used to provide a signal to a recording or sound reinforcement mixer. In addition, this output can be used to drive another BXR 60 used as a slave amp. This is done by connecting a standard guitar cord from the PREAMP OUT jack of the master amplifier to the POWER AMP IN jack (item H) of the slave.
J.
H. POWER AMP IN jack - This unbalanced input goes directly into the power amp. It automatically disconnects the preamp when used. This jack is useful when using the effects loop feature, or when using the BXR 60 as a slave amp. HEADPHONES output jack -This jack allows the use of stereo headphones for private listening. When this jack is used, the internal speaker is disconnected. [. . . ] - Is the volume control on the instrument turned up?- Is the instrument properly plugged into the amplifier?(Eliminate any effect pedals and try another guitar cord. ) If, after checking all of the above, the system is still not performing correctly, consult your FENDER Service Dealer.
BXR 60 Specifications
Part Number: 120V Version: 230V Version: PR 261 100V 120V 230V 240V Version: Version: Version: Version: 100VAC, 120VAC, 230VAC, 240VAC, 50/60 Hz 180W 60 Hz, 180W 50 Hz, 180W 50 Hz, 180W 22-4404 22-4464 Type Specification: Power Requirements:
POWER AMPLIFIER SECTION: Power output: Rated load impedance: Distortion: 60 watts R. M. S. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FENDER BXR 60
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FENDER BXR 60 will begin.
