User manual FENDER G-DEC EXEC

[. . . ] ¨ OWNER'S MANUAL 2 G-DEC Important Safety Instructions · This symbol warns the user of dangerous voltage levels localized within the enclosure of the unit. · This symbol advises the user to read all accompanying literature for safe operation of the unit. · Read, retain, and follow all instructions. Heed all performance; or the product has been dropped, or the enclosure damaged. [. . . ] POWER CORD SOCKET - Connect your G­DEC to an A/C outlet using the included power cord. FUSE - Protects your G­DEC from electrical faults. Replace a blown fuse only with the type and rating specified below the fuse holder. To remove the fuse holder: Unplug the G­DEC power cord from the socket to expose the fuse holder. Use a small screwdriver to pry out the fuse holder using the notch on top. R. AUX IN - Auxiliary input for your CD o r MP3 player. Playback music through your G­DEC for accompaniment or to learn songs. Connect the (headphones) output on your player to the AUX IN "RCA" jacks using the proper cable or adapter. You can select a "focus" filter and adjust the auxiliary input level through the Aux Mode menus (see page 10). INPUT - An extra input for an instructor or a friend to plug into. How Do I. . . ? START OR STOP DRUM LOOP?Press and hold EXIT while rotating the Data Wheel. Press SAVE, rotate the Data Wheel, then press SAVE again. SWITCH DRUM PATTERNS?Press DRUMS, then rotate the Data Wheel. Rotate the Data Wheel (in Play Mode). USE THE TUNER?Press Record / Play. RETURN TO PLAY MODE?Press EXIT. MODIFY PHRASE SAMPLER AND AUX INPUT FUNCTIONS?Use AUX Mode (see page 10). RENAME A PRESET?Press UTILITY, then rotate the Data Wheel. SWITCH GUITAR EFFECTS?Press FX, then rotate the Data Wheel. SWITCH GUITAR AMPS?Press AMP, then rotate the Data Wheel. Play Mode Shor tcut--Press and hold this button while rotating the Data Wheel to make a quick adjustment without leaving Play Mode. tcut fender. com 6 G-DEC Play Mode Play Mode is the normal G­DEC mode, active at start-up. Play guitar, select presets and play the drum loop (or the phrase sampler) in Play Mode. [. . . ] In general, to perform this operation, access the "Amp Update" item in the Utility Menu (see Utility Mode, page 11) and follow the on-screen instructions. When the G­DEC states it is ready to receive a MIDI Update, use your selected SYSEX application (the same used for preset dumps and loads) to send the G­DEC update file to the amp. Other important instructions may be included with the update package. Using the On-Board Synthesizer with an External Controller The G­DEC has a full General MIDI compatible synthesizer on board that may be triggered using an external MIDI controller. [. . . ]