User manual FENDER MX-METERBRIDGE

[. . . ] Because loudspeaker enclosures placed on the Passport tripod speaker stand could be damaged or cause bodily harm if they fall, please read through these instructions and heed all caution and safety warnings. [. . . ] This will ensure the Passport tripod speaker stand is at its maximum footprint (Using a smaller footprint will adversely affect the stability of the unit). Remember to secure all wires coming from the Passport tripod speaker stand for reasons of both safety and good presentation (loose wires can be tripped on and give a cluttered, unprofessional appearance). IMPORTANT When setting up your Passport tripod speaker stand, make sure it is placed on a dry, flat and secure surface. Also, when placing, raising or lowering gear on the Passport tripod speaker stand, it is recommended that at least two people undertake these procedures. Re-tighten handknob and check the stability of the unit at the desired height setting. Tighten collar handknob REMEMBER . . . 3 Turn tripod upside down and pivot legs out. Check to ensure that all handknobs are secure when supporting equipment. Clean your Passport tripod speaker stand Tripod using a damp cloth or any non-abrasive cleaner. [. . . ] Make sure that speakers are securely mounted on the stand. [. . . ]