User manual FENDER POWER STAGE 100

[. . . ] We are sure you will find the PowerStage 100 to be both a unique and effective sound reinforcement product, providing years of trouble-free service. Enclosed in a quasi-trapezoidal floor monitor style cabinet, the PowerStage 100 includes a 3 channel preamp, a power amp, a power supply and a fullrange coaxial speaker system. With three angles of orientation, inputs for microphones and a variety of musical instruments, the PowerStage 100 is suitable for nearly every monitoring application. The PowerStage 100 also features a unique detachable wired remote control panel. [. . . ] Before plugging or unplugging any microphone, make sure the Phantom Power supply is off. MIC 1 IN - Plug your microphone in here. This three pin XLR balanced female input connector is intended for input signals from low impedance microphones. MIC 2 IN - An additional balanced microphone input for the PowerStage 100. Both the MIC 2 IN and the INST jack can be used simultaneously, however, any adjustments to the MIC 2 / INST control knob will affect the volume of both the Mic 2 and Instrument inputs. LINE - A 1/4 inch TRS balanced input jack suited for use with items having a line level output. Both the AUX LINE and the STEREO jack can be used LINE simultaneously but remember, any adjustments to the AUX LINE / STEREO LINE control knob will affect the volume of both the AUX LINE / STEREO LINE inputs. PHANTOM POWER LED - This LED illuminates when the phantom power supply is on. A F G G. POWER LED - This LED illuminates when the PowerStage 100 is on. MIC 1 OUT - This three pin XLR balanced male output connector is used to send the MIC 1 input signal unmodified out to a mixing console. INST - A 1/4 inch TS unbalanced input jack suited for use with instrument level signals such as an acoustic guitar, a keyboard or a drum machine. Remember, any adjustments to the MIC 2 / INST control knob will affect the volume of both the Mic 2 and Instrument inputs. STEREO LINE - These are unbalanced phono (RCA) input jacks designed for use with a stereo tape player, CD player, etc. These jacks produce a mono signal out and are useful for playing prerecorded music. Adjustments to the AUX LINE/STEREO LINE control knob will affect the volume of both the AUX LINE / STEREO LINE inputs. LINE OUTPUT - A 1/4 inch TRS unbalanced output jack designed to feed the optional PowerStage Xpander 100. B H C I D J E K E. INSERT - A 1/4 inch unbalanced TRS input / output phone jack designed for use with signal processing devices, such as a digital delay or a reverb unit. A special "Y" line cord (stereo to 2 mono) is required to use this jack. On the PowerStage 100, the tip is the send and the ring is the return. POWER SECTION L L. SUPPLY CORD JACK - The supply cord connects here. This is a grounding type supply cord to reduce the possibility of shock hazard. Be sure to connect it to a grounded receptacle. [. . . ] · If using an effects processor, is the "Y" line cord properly connected?Remember, turning up the Mic 2 / Inst volume WILL NOT affect the output of the main P. A. It WILL determine how much of your "dry" signal you will hear. MINI PA SET UP (A ONE PERSON BAND) 1. Connect your microphone to the Mic 1 In jack, your instrument to the Inst jack and a tape or CD player to the Stereo Line jack. [. . . ]