User manual FESTOOL CLEANTEX CT 36 BROCHURE

[. . . ] With compact dimensions and low weight, bringing greater flexibility to the building site and the shop floor. With swivel castors for steering and rear wheels made from specially designed material for reduced wear. With a locking brake and precisely balanced, low centre of gravity to ensure stability on any surface. And with a modular plug-in system for quick and simple customising ­ from an additional power socket to an integrated compressed air port. [. . . ] The gross volume and the net volume are the same. Intelligent self-cleaning: thanks to its flexible non-woven material and the shape of the dust container, the SELFCLEAN filter bag collapses into itself when the power is switched off. This shakes off the dust, preventing it from caking onto the sides of the bag, which can otherwise reduce suction power and even cause the filter bag to burst. www. festool. com 5 Practicality comes as standard. Mobile dust extractors CLEANTEX CT 26 | CT 36. 6 With the modular plug-in system, every mobile dust extractor can be fitted with additional modules according to your requirements: you can add a compressed air module, a power socket with continuous current, a power socket with automatic electronic switch-on/shut-off, or a module for connecting to a Festool energy box. * The flat filter saves so much space that more room is available despite the smaller size of the unit. The gross volume and the net volume of the mobile dust extractor are the same. Super strong and super small: the high-power turbine provides considerably higher suction power but takes up very little room due to its compact design. To keep everything tidily stored and protected, the CLEANTEX is equipped with a cord holder and a hose garage that can also be used to store small tools and parts. All Festool systainers in sizes 1-5 and all sortainers can be latched onto the Sys-Dock. The integrated locking brake ensures stability when stationary. The combination of swivel castors for steering and rear wheels made from specially designed material reduces wear and wheel noise. The size of the wheels means that the CLEANTEX will not easily tip over; its balanced centre of gravity makes for comfortable and convenient carrying. The new tear-resistant non-woven filter bags clean themselves by collapsing inwards when the motor is switched off. This SELFCLEAN effect ensures constant high suction power until the bag is entirely full. Overall, up to four times as much fine dust can be extracted using one bag, reducing the number of filter bags you use. A new, optimised approach to servicing shortens the time required for any repairs. The structural design allows faster access to the relevant spot, whether for a simple castor change, or for a change of the turbine and its carbon packing gland. * Module must be fitted by a qualified electrician. www. festool. com 7 When sanding paint, filler or putty, when assembling furniture and laying floors, the CLEANTEX mobile dust extractors can be relied on to get rid of all dust. No matter whether you're using air tools or power tools. 8 Immaculate work is its hallmark. Demand nothing less from your mobile dust extractor. You can only achieve precise results when you can see the surface you are working on. That's where the new CLEANTEX comes in. It sucks away all dust right at the point where it is produced. Keeping your view of the work clear, regardless of whether you are sanding, milling or sawing. While also keeping the workspace clean automatically. Which is especially important for jobs done on the customer's own premises. Since health protection is also a concern when working on paint, filler, plaster and wood, the new CLEANTEX filters out 99 percent of all dust in dust class L (light hazard) and fully 99. 9 percent in dust class M (medium hazard), with a flow sensor included to monitor suction. [. . . ] 496141 Accessory holder for nozzles Insert nozzles (with diameter 36 mm) to tidy them away. + Accessory holder for nozzles ZBA-D-CT 26/36 Order no. 496373 Secure storage Tool holder for storing a sander directly on the dust extractor. 496122 www. festool. com 11 Technical data 1 Longlife filter bag Longlife-FIS-CT 26 Explanations/Dimensions For CT/CTL 26; made from high-strength, long-life, triple-ply non-woven polyester, can be emptied easily and re-used, only for use when extracting non-hazardous dust; package contents: 1 bag. [. . . ]