User manual FESTOOL HL 850 EB

[. . . ] Overall vibration levels (vector sum for three directions) measured in accordance with EN 60745: Vibration emission level (3 directions): ah < 2. 5 m/s² Uncertainty K = 1, 5 m/s² The emission values specified (vibration, noise) were measured in accordance with the test conditions stipulated in EN 60745 and are intended for machine comparisons. They are also used for making preliminary estimates regarding vibration and noise loads during operation. The emission values specified refer to the main applications for which the power tool is used. [. . . ] 1) by pressing to the front to lock the set chip thickness. 5 mm be set with a plane width > 40 mm. By turning the handle beyond the 0 mm marking, you reach position P = Park position. In position P, the planer head cutter is pulled back completely behind the planer platen. 2 Planing head, planer blade Use only cutters which are sharp and undamaged. blunt cutters increase the danger of kick-back and reduce the planing quality obtained. The planer is equipped with planer head HK 82 SD 11 The machine must always be held with both hands by the designated handles (1. - Place The front platen onto The workpiece but do not allow The planer head to come into contact with The wood. Press on The front planer platen when starting to plane and on The rear planer platen (end of workpiece) when continuing or finishing planing. To do this, fold away the protective cover (2. 5) forward and then laterally to the left. The front of the planer head is now exposed. When work is completed, the protective cover moves back automatically to initial position through spring force. 2 Chamfering The front planer platen is equipped with a 90° V groove (2. 12) to allow the chamfering of workpiece edges. This V groove is 2 mm deep, thus producing a 2 mm edge chamfer with the chip thickness setting 0. 3 Bench-mounted operation The planer can be operated bench-mounted in conjunction with the bench-mounting device SE-HL. Detailed instructions are supplied with the accessories. 4 Rustic planer heads (accessories) The planer can also be used to create rustic surfaces. Three rustic planer heads are available for this purpose: - HK 82 RG: creates a surface with a coarse structure. When using rustic planing heads on the planer, set the cutting depth to 0 mm. 36 mm) can be connected at both openings. [. . . ] in addition , the manufacturer`s current warranty conditions apply. Note We reserve the right to make changes to the technical data contained in this information as a result of ongoing research and development work. 10 Disposal Do not throw the power tool in your household waste!EU only: European Directive 2002/96/EC stipulate that used electric power tools must be collected separately and disposed of at an environmentally responsible recycling centre. [. . . ]