User manual FESTOOL KS 88 E

[. . . ] Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1 WORK AREA SAFETY a) Keep work area clean and well lit. cluttered and dark areas invite accidents. [. . . ] B) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. C) When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one ter- D) Under abusive conditions, liquid may be ejected from the battery; avoid contact. if contact accidentally occurs , flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6 SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Various dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: · lead from lead-based paints , · Crystalline silica from bricks and cement and other masonry products, and · arsenic and chromium from chemicallytreated lumber. The risk from these exposures varies, depending on how often you do this type of work. This enables you to optimise the cutting speed to suit the respective material. In position A, the automatic load detection is activated: The stroke speed is reduced in idling and is controlled to the highest value when the blade enters the workpiece. Recommended stroke speed (position of the adjusting wheel) Hard and soft wood, plywood board, plywood, chip board Hardboard Plastic Ceramic, aluminium, non-ferrous metals Steel A 4-A 3-A 3-5 2-4 Instead of the saw table, the angle table WT-PS 400 or adaptation table ADT-PS 400 can be installed at the support. Never saw without the saw table, or one of the other tables offered in the Festool accessories program. The splinterguard makes cuts with splinter-free cutting edges possible, even on the exit side of the saw blade. X With the machine switched off, push the splinterguard [3-1] onto the guide up to the saw blade [3-2], X switch on the jigsaw, X with the machine running (Speed range 5), push the splinterguard in on a flat plane until it is flush with the front edge of the saw table. In order to process different materials with an optimum feed movement the pendulum jigsaws have an adjustable pendulum stroke. Select the desired setting with the pendulum stroke switch [1-12]: setting 0 = pendulum stroke off setting 3 = maximum pendulum stroke Recommended settings of the pendulum stroke Hard and soft wood, chip board, wood fibre 1-3 board X Insert the extraction adapter into the rear opening of the saw table so that the hook [4-2] engages in the [4-1] recess. Deformed or cracked saw blades and saw blades with blunt or broken cutting edges must not be used. Selecting saw blade Only use saw blades with a T-shank. The saw blade should not be longer than that required for the intended cut. [. . . ] X Do not look into the stroboscope light. Use only original Festool accessories and Festool consumable material intended for this machine because these components are designed specifically for the machine. Using accessories and consumable material from other suppliers will most likely affect the quality of your working results and limit any warranty claims. Machine wear or your own personal workload may increase depending on the application. [. . . ]