User manual FESTOOL MIC 1600

[. . . ] They differ only in their suction performance ­ their sturdy, technical construction and their reliability in daily continuous operation are identical. Here we will show you how the application of the Festool dust extraction turbine TURBO in combination with the boom arm ASA could look in practice. The dust extraction turbine TURBO can be housed in the direct vicinity of the workplace or separately in another room because it does not require much space thanks to its compact design. The layout of the pipe system is individually dependent on the on-site workshop conditions, the number of workplaces where dust extraction is to be carried out and the electric power tools and pneumatic tools used in parallel. For single workplaces or mobile dust extraction, the combination of CT mobile dust extractor with boom arm ASA or with Toolcenter TC is still the proven solution for an optimum dust extraction result. Simply clean. The sanding dust that is sucked in is collected in the dust container. [. . . ] The dust extraction turbine has been developed especially for these requirements. Depending on the version, up to 16 tools or 8 boom arms can be operated parallel to each other using this turbine. Its features make it a real professional for workshop applications: the stable housing and the well-engineered cleaning system ensure a long service life and constant high suction power. Long pipe distances do not take the wind out of this turbine because low loss of circulation in the pipe system ensures consistent suction power at any workplace. Larger installations can also be achieved easily and without problems via separate dust extraction circuits. In this way, a gradual extension can also be implemented later on. At the same time, this increases the availability of the dust extraction if repair work or maintenance has to be carried out on a dust extraction circuit. Using compressed air against dust ­ this is the principle of jet-air technology. The filter is cleaned by being blown clear with clean air that is sucked in rather than being shaken as is the procedure in mechanically pneumatic systems. The pneumatic cleaning is effective and produces little noise. And this is how the principle works: the compressed-air nozzle is located in the centre of the filter. With the Festool product range, we are in a position to deliver custom-made dust extraction solutions for nearly any workshop requirement. Dust bag STB-TURBO Plastic Contents: 10 bags Order No. Main filter HF-TURBO Filter surface area 50, 000 cm2, Filter degree of filtration 99. 9% Contents: 1 filter Order No. 492 731 492 730 Boom arm ASA and Energy box EAA Powerful dust extractors. · Constant high suction power even when several pneumatic tools or electric power tools are used simultaneously thanks to three-phase drive, which can withstand continuous operation. · Easy and application-oriented operation. · Unique jet-air cleaning system with self-cleaning filter. System components Description and application A well-designed system approach ­ very impressive. Energy box EAA 2/3 EW/DW TURBO Scope of delivery: power box with 2 x 230V connections and complete compressed-air supply unit with 3 connections, in a box Order No. 583 808 Dust extraction turbine TURBO Versions Dust extraction turbine MIC 1600 Order No. 273 555 Dust extraction turbine TURBO 4001 Order No. : 273 394 Dust extraction turbine TURBO 7501 Order No. : 273 395 Boom arm ASA 5000 TURBO Scope of delivery: double-jointed arm with wall bracket, in a box Order No. 273 382 Pneumatic mobile dust extractor CT Scope of delivery: dust extraction turbine, 1 dust bag, 1 absolute filter (mounted), on a pallet Technical Data Supply voltage/ Frequency [V/Hz] Power consumption [kW] Compressed-air supply Jet-Air cleaning (flowing pressure) max. [Pa] Noise level [db(A)] Dimensions (DxWxH)[mm] approx. Filter surface area [cm2] Hose spout Intake air/exhaust air Outer diameter [mm] Protection class [IP] MIC 1600 TURBO 4001 TURBO 7501 Boom arm ASA 6000 TURBO Scope of delivery: double-jointed arm with wall bracket, in a box Order No. [. . . ] 273 434 400/50 2. 2 400/50 3 400/50 5. 5 6 6 6 Pneumatic eccentric sander LEX 2 Toolcenter TC 3000 Scope of delivery: TC 3000, 1 hose holder, in a box Order No. 583 285 4, 670 28, 000 68 500 x 1, 000 x 900 107 50, 000 4, 833 28, 000 70 500 x 1, 000 x 900 109 50, 000 8, 500 23, 500 78 600 x 1, 100 x 1, 200 200 50, 000 Rear panel TC 3000 RW for Toolcenter TC 3000 including 10 hanger hooks, Dimensions length x width: 990 x 340 mm Order No. 452 986 Pneumatic orbital sander LRS Eccentric sander ETS Rotex RO Stickfix sanding pads Interface pad 75 55 75 55 75 55 Stickfix abrasive Titan 2 and Platin 2 6 7 www. festool. com Your link to more information. . . Online product catalogue Service Online shops News and special offers Dealer search Test reports Example applications 3D animation On our current Festool site you can, for example, find information about · · · · · the complete product range interesting new products countless product animations many helpful application examples or our comprehensive service offer. And all of this at your leisure. Do you want to be able to order around the clock? [. . . ]