Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FIELD CONTROLS 46150400. We hope that this FIELD CONTROLS 46150400 user guide will be useful to you.
Lastmanuals help download the user guide FIELD CONTROLS 46150400.
Manual abstract: user guide FIELD CONTROLS 46150400
Detailed instructions for use are in the User's Guide.
[. . . ] REPAIR MOTOR KIT
Model: SWG
CAUTION: Before working on power venter, shut off electrical power to control box
ITEMS INCLUDED IN KIT: For kit with conduit clamp on motor 1) Replacement motor assembly with blower wheel 6) #8-18 x 1/4" screws For kit with an electrical box on motor 1) Replacement motor assembly with blower wheel 6) #8-18 x 1/4" screws 1) 3/8" conduit connector 3) Wire nuts 3) 18GA motor lead wires
REMOVAL FOR KIT WITH CONDUIT CLAMP ON MOTOR 1. Remove the motor enclosure cover by loosening the four screws. [. . . ] Clean off any build-up inside the blower wheel housing. INSTALLATION FOR KIT WITH CONDUIT CLAMP ON MOTOR 1. Insert the blower wheel into the hole in the front plate of the venter housing. Using two nails or awls, align the two center holes of the motor mount bracket and cover plate. Locate the motor assembly into position by sliding the assembly over the mounting holes in the front plate. Use the nails or awls to hold assembly in position. (See Figure 6) Secure motor assembly into position at the four corners, then secure center two holes. Route the wires from the new motor repair kit through the conduit and attach to the control kit in the appropriate location. Secure the conduit to the motor using the conduit clamps. Seal the top edge of the motor assembly with a high temperature silicone sealant. [. . . ] Seal the top edge of the motor assembly with a high temperature silicone sealant. Install the motor cover with the side louvers pointing downward.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Page 2
P/N 46150400 Rev B 01/01 [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FIELD CONTROLS 46150400
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FIELD CONTROLS 46150400 will begin.
