User manual FISHMAN MATRIX INTY PREAMP INSTALLATION GUIDE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FISHMAN MATRIX INTY PREAMP. We hope that this FISHMAN MATRIX INTY PREAMP user guide will be useful to you.
Lastmanuals help download the user guide FISHMAN MATRIX INTY PREAMP.
Manual abstract: user guide FISHMAN MATRIX INTY PREAMPINSTALLATION GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Fasten the pickup wires to the terminal block on the preamp module. The signal wire goes to the terminal marked "IN" and the shield wire goes to the "GND" terminal. Tighten the screws on the terminal block to secure the wires. [. . . ] Clean this surface with an alcohol wipe or a cotton swab moistened with rubbing alcohol. Note: For the strongest bond we recommend that you now apply a water-based primer/sealer to the bare wood inside the soundhole. Let the primer/ sealer dry before continuing. Peel back the release film on the bottom of the preamp module and fasten the preamp to the underside of the soundhole. Apply even, steady pressure to the module to set the adhesive. The adhesive gains maximum hold after 24 hours. Install the pickup per Acoustic Matrix Installation Instructions.
Figure 1.
Figure 2. 1
Battery Bag Install the battery bag on or near the neck block as shown in figure 1. Clean the area where you will mount the bag with an alcohol wipe or cotton swab moistened with rubbing alcohol. Peel off the plastic film from the Velcro patch and attach the bag at the chosen location. Carefully separate the bag from the Velcro patch. To set the adhesive, burnish the entire area of the patch, especially the edges. Install a 9V alkaline or lithium battery. Tuck the battery into the bag and re-attach to the Velcro patch. The adhesive under the Velcro patch requires 24 hours to achieve a full bond, so take care to not stress the adhesive if you remove the battery bag after the initial installation. Figure 3.
Installation Options
Nylon String Guitar Mount An optional control module mount is provided in the package for use with nylon string guitars whose bracing patterns may interfere with the standard mount. [. . . ] Second Pickup Source Option A second source such as a microphone or magnetic soundhole pickup may be added (figure 6). The output will appear on the ring connection when a tip-ring-sleeve 1/4" jack is inserted. For specific wiring diagrams, refer to fishman. com. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FISHMAN MATRIX INTY PREAMP
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FISHMAN MATRIX INTY PREAMP will begin.
