User manual FLAM DESIGN 75-52 DIMENSIONS

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. okiprintingsolutions. com Trademark Information _______________________________ Oki and Microline are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] Bi-Direction Enable bidirectional communication with the PC. PS Protocol Enable Enable Disable Press < > or < > buttons to toggle between Enable and Disable. Press <SELECT> to save the selection. ASCII ASCII RAW Press < > or < > buttons to toggle between EASCII and RAW. Press <SELECT> to save the selection. MPS6500b User's Guide> 68 Serial Menu The Serial Menu provides access to the Serial settings. Use the following procedure to enter the serial menu: 1. Press the MENU button on the control panel. Press the < > button until the text "Serial Menu" is shown on the first line of the display. Press the < > button to enter the serial menu. Press the < submenus. > or < > buttons to move through the Press the < > button to enter the submenu. Use the procedures in the following table to access and change the Serial Menu settings: Submenus Default Setting Enable Available Settings Enable Disable Procedure for Changing Setting Press < > or < > buttons to toggle between Enable and Disable. Press <SELECT> to save the selection. Serial Baud Rate 9600 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 Press < > or < > buttons to scroll through the selections. Press <SELECT> to save the selection. Press <SELECT> to save the selection. USB This submenu allows you to set up the USB interface. PS Protocol ASCII ASCII RAW Press < > or < > buttons to toggle between ASCII and RAW. Press <SELECT> to save the selection. MPS6500b User's Guide> 72 Network Menu The Network Menu provides access to the printer network settings. Use the following procedure to enter the network menu: 1. Press the MENU button on the control panel. Press the < > button until the text "Network Menu" is shown on the first line of the display. Press the < > button to enter the Network menu. Press the < submenus. > or < > buttons to move through the Press the < > button to enter the submenu. Use the procedures in the following table to access and change the Network Menu settings: Submenus Default Setting Enabled Available Settings Enabled Disabled Procedure for Changing Setting Press < > or < > buttons to toggle between Enable and Disable. Press <SELECT> to save the selection. TCP/IP Ethertalk Enabled Enabled Disabled Press < > or < > buttons to toggle between Enable and Disable. Press <SELECT> to save the selection. IP Address Set Automatic Automatic Manual Press < > or < > buttons to toggle between Automatic and Manual. Press <SELECT> to save the selection. MPS6500b User's Guide> 73 Submenus Default Setting (user-specified) Available Settings (user-specified) Procedure for Changing Setting The first set of numbers blinks Press < > or < > to scroll to the desired number. [. . . ] Switch off the machine immediately, and contact service. · Remove any remaining pieces of paper. · Remove any dust or stains with a clean dry cloth. MPS6500b User's Guide> 127 Cleaning the Feed Roll When feeding cannot be done, follow the procedure below to wipe the feed roll gently with a well-wrung soft cloth. There are feed rolls in the interior of this printer (two locations, total of four), tray module (one location) and paper tray (one location). TJ094ano_text. jpg A B C D A Feed rollers (1) B Inside of machine (two locations) (2) Open Cover A and after removing the drum/toner cartridge, clean the feed roller. [. . . ]