User manual FLAM ELEGANZA 44-67 JUNIOR DIMENSIONS

[. . . ] Mention of software product manufactured by other companies does not necessarily constitute endorsement by the manufacturer. While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy of completeness of the information contained herein. The most up-to date driver and manuals are available from the web site: http:\\okiprintingsolutions. com Trademark Information _____________________________________ Adobe, the Adobe logo, PostScript, PostScript 3 and the PostScript logo are trademarks of Adobe Systems Incorporated. Microsoft, Windows, Windows NT, Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. [. . . ] Once the new address is submitted to the printer, the new address will have to be entered into the browsers' address. Most of the printers' configuration can be done through the browser including setting the administrator password. PRINTING FROM A WINDOWS COMPUTER OVERVIEW This chapter provides guidelines on how to print over the network from various Microsoft Windows platforms. There are numerous ways of printing from Windows and the exact set-up will vary depending upon your environment. There are also numerous versions of Windows, which can be configured as either a client, server or both. Although there are many variants of Windows, the principles of network printing are the same. Microsoft provides on-line help with all of their operating systems and this is a good reference point for the exact details of each configuration option within Windows. MPS930b User's Guide> 77 The network printer supports TCP/IP protocol that can be used in conjunction with the Windows operating system. LPD or Port 9100 (TCP/IP) Once the printer registered on the Windows NT 4. 0/Windows 2000/ Windows XP/Windows Server 2003 computer is shared, you can also print from Windows 95/Windows 98/Windows Me computers through this printer. INSTALLATION OF TCP/IP PROTOCOL There are a number of options available when printing using TCP/IP for Windows. The following table lists the options: WINDOWS 95/98/Me NT 4. 0 VERSION METHOD FLAM LPR Utility FLAM LPR Utility Microsoft LPR1 2000/XP/Vista FLAM LPR Utility Microsoft LPR1 Port 91001 1These functions are built into Windows and are displayed as options when using the Add Printer Wizard. Although there are some differences in configuration options between the various Windows platforms, the procedure for printing using TCP/IP is the same. Ensure that the TCP/IP protocol has been installed in Windows. This can be confirmed by checking the network settings from within the Operator Panel. If TCP/IP has not MPS930b User's Guide> 78 been installed refer to the section below Installation of TCP/ IP protocol. If not already configured, a suitable IP address, Subnet Mask and Gateway address should be configured. Please refer to the on-line help if necessary. In the [Local Area Connection Properties] dialogue box, click [Install]. In the [Select Network Component Type] dialogue box, select [Protocol] and click [Add]. In the [Select Network Protocol] dialogue box, select [TCP/IP Protocol] and click [OK]. Click [Close] button in the [Local Area Connection Properties] dialogue box. Click [Close] in the [Local Area Connection Status] dialogue box. Windows XP and Vista 1. Click the [Start] button and select [Control Panel]. Select [Network and Internet Connection] and [Network Connection]. Double-click [Local Area Connection] and click [Properties] in the [Location Area Connection Status] dialogue box. If the [Internet Protocol (TCP/IP)] is not listed, click [Install. ]. In the [Select Network Component Type] dialogue box, select [Protocol] then click [Add]. In the [Select Network Protocol] dialogue box, select [Internet Protocol (TCP/IP)] then click [OK]. [. . . ] Remove the shipping hardware and discard. 10. Adjust the feet on the feeder assembly to set the feeder position parallel to the printer. MPS930b User's Guide> 184 11. Connect the feeder power cord into the printer accessory outlet. 12. Slide the drawer out of the feeder. 13. Remove the shipping screws. MPS930b User's Guide> 185 14. Adjust the feeder paper size guides. 15. Load the paper tray. 16. Turn on the power switch of the laser printer. 3500 SHEET FINISHER The finisher provides a main 3000 sheet lower stacker and a top 500 sheet stacker. It also provides a stapler for up to 50 sheets of standard paper and a hole punch. In Europe the punch has a 2 hole MPS930b User's Guide> 186 and a 4 hole capability while in the Americas, the punch is a 3 hole punch 1. [. . . ]