User manual FLORABEST FKM 2400 A1

[. . . ] no liability will be accepted for damage caused by misuse or improper handling , unauthorised modification or the use of force. No warranty claims of any kind will be accepted for damage caused by improper use, incompetent repairs, unauthorised modifications or for the use of unapproved relacement parts. In these extant operating instructions the following warning notices are used: WARNING A warning at this risk level indicates a potentially dangerous situation. If the dangerous situation is not avoided it can lead to physical injuries. [. . . ] Do not sweep up burning or smouldering objects, such as cigarettes, matches or similar. If glass, metal or other materials have to be removed from the collecting container, please wear a pair of stout gloves. nEVER sweep up explosive liquids , flammable gases or undiluted acids and solvents!These include petrol, paint thinner or heating oil, which, by swirling with the air, can form explosive vapours or mixtures, as well as acetone, undiluted acids and solvents, as these can attack the materials used on the appliance. The appliance is delivered with the following components as standard: 1 x Push bar, upper element 1 x Push bar, lower element 1 x Sweeper with collecting container 2 x Plate brushes 1 x Operating instruction Check the contents to ensure everything is present and for signs of visible damage. Remove the appliance and these operating instructions from the carton. WARNING Packaging material should not be used as a play thing by children. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable. The recirculation of packaging into the material circuit saves on raw material and reduces the amount of waste generated. Dispose of packaging material that is no longer needed according to the regionally established regulations. NOTICE If possible preserve the appliance's original packaging during the warranty period so that in the case of a warranty claim you can package the appliance properly for return. Push bar, lower element Plate brush Adjustment screw for adjusting the height of the plate brushes Collecting container Step 1 Firmly screw the plate brushes 3 with 3 screws each to the acceptor plates. Step 2 Insert the push bar brackets into the receiver slots and then tighten them firmly with the mounting screws . Step 3 Insert the push bar lower element 2 into the push bar mounting tighten it down with 2 lock nuts . Step 4 Insert the push bar upper element into the push bar lower element 2 and screw it firmly into place with 2 mounting screws and 2 lock nuts . By pushing the sweeper the plate brushes 3 and sweeping brushes are set into rotatation via belt drives. the rotating plate brushes 3 sweep the dirt to the middle. The dirt is then lifted up by the two sweeping brushes and carried into the collecting container 5 . Depending on the application and wear and tear, the plate brushes 3 can be steplessly adjusted in their operating height. To do this, turn the adjustment screw 4 to the right to raise the plate brushes 3 , resp. To the left to lower the plate brushes 3 . The push bar can be adjusted in three stages, to the heights of approx. [. . . ] Only in this way can a post-free dispatch for your goods be assured. NOTICE The warranty covers only claims for material and maufacturing defects, not for transport damages, worn parts or for damage to fragile components, e. This appliance is intended solely for private, non-commercial use. If this product has been subjected to improper or inappropriate handling, abuse, or modifications not carried out by one of our authorised sales and service outlets, the warranty becomes void. [. . . ]