User manual FLORABEST KH 3127 / PRC 9.6 CORDLESS BRANCH CUTTER

[. . . ] Please make sure you familiarise yourself fully with the way the device works before you use it for the first tim e and that you under-stand how to handle electrical power tools correctly. To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation. [. . . ] f) Use the electrical power tool , accessories , inserted tools etc. In accordance with these instructions and advice, and the stipulations drawn up for this particular type of device. In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. A) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. B) Wear personal protective equipment and always wear safety glasses. The wearing of personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of electrical power tool used and work undertaken, reduces the risk of injury. c) Avoid unintentional operation of the device. Accidents can happen if you carry the device with your finger on the switch. D) Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury. E) Do not overestimate your own abilities. keep proper footing and balance at all times. By doing this you will be in a better position to control the device, especially in unforeseen circumstances. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of moving parts. Loose clothing, jewellery or long hair can become trapped in moving parts. J Check the condition of the device, charger 11 , lead 12 and plug 13 before starting to charge the device. Do not use the tool if any of the parts are damaged. Repair or replacement must only be carried out by the Service Office or an electrical expert. [. . . ] Make sure that the markings showing the direction of rotation on the new saw blade 7 and on the saw blade cover 9 point in the same direction (see Figs. Screw the saw blade cover 9 back on to the device using the screw 6 . In accordance with European Directive 2002 / 96 / EC (covering waste electrical and electronic equipment) and its transposition into national legislation, worn out electrical power tools must be collected separately and taken for environmentally compatible recycling. Contact your local refuse disposal authority for more details of how to dispose of your worn out electrical devices. [. . . ]