User manual FLUKE 32MM MOLBLOC CRADLE KIT INSTALLATION
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FLUKE 32MM MOLBLOC CRADLE KIT. We hope that this FLUKE 32MM MOLBLOC CRADLE KIT user guide will be useful to you.
Lastmanuals help download the user guide FLUKE 32MM MOLBLOC CRADLE KIT.
Manual abstract: user guide FLUKE 32MM MOLBLOC CRADLE KITINSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] Installation and Use of 32mm molbloc Cradle Kit
P/N 402134 Instruction Sheet
This kit is used to retrofit the 1/4" molstic-STM platform in order to provide mounting for the molbloc-LTM laminar flow elements with 32 mm square bodies.
PREPARING THE PLATFORM FOR CRADLE INSTALLATION
Early deliveries of the molstic-S platform did not include the holes necessary to mount the downstream cradles for 32 mm molbloc-L elements. [. . . ] Punch the intersection of the marked lines to facilitate drilling the platform. Drill all necessary holes to a diameter of 4. 6 mm.
INSTALLATION OF CRADLES ONTO MOLSTIC-S PLATFORM
With the molstic-S resting on its side, position the upstream cradle for the 32 mm molbloc-L into the desired location, either 1, 2, or 3. Place a lock washer and then a flat washer onto the socket head cap screw. Thread the screw into the upstream cradle from the bottom side of the molstic platform and leave loose enough to allow for later adjustment. Thread another screw with lock washer and flat washer into the other side of the upstream cradle. Position the downstream cradle for the 32 mm molbloc-L into the desired location, either 4, 5, or 6. Repeat these step with any other cradles that might need to be installed. For best alignment results, plumb the appropriate molbloc element into each branch of the molstic prior to final tightening of the socket head cap screws. [. . . ] Document 560070 040907
DH Instruments, Inc.
4765 East Beautiful Lane Phoenix AZ 85044-5318 USA
Tel 602. 431. 9100 Fax 602. 431. 9559 dhi@dhinstruments. com www. dhinstruments. com [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FLUKE 32MM MOLBLOC CRADLE KIT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FLUKE 32MM MOLBLOC CRADLE KIT will begin.
