User manual FLUKE ADCS-601

[. . . ] Operation and Maintenance Manual ADCS-601TM Air Data Calibration Standard © 2005 DH Instruments, Inc. ADCS-601TM OPERATION AND MAINTENANCE MANUAL Pressurized gases are potentially hazardous. Energy stored in these gases can be released unexpectedly and with extreme force. Pressurized systems should be assembled and operated only by personnel who have been instructed in proper safety practices. © 2005 DH Instruments, Inc. Information in this document is subject to change without notice. [. . . ] The PG7601 Run Screen should only be used to view PG7601 status. Use of the Toolbar on this run screen may conflict with other ADCS-601 Tools functions. The PG7601 Run Screen Toolbar should only be used for advanced trouble shooting by qualified personnel. Figure 38. PG7601 Run Screen Page 79 © 2005 DH Instruments, Inc. ADCS-601TM OPERATION AND MAINTENANCE MANUAL 4. 3. 6. 2 FPG8601 PRESSURE STANDARD The FPG8601 Run Screen provides more detailed information on FPG8601 status and a Toolbar to control it directly. Use the [FPG8601 Run Screen] button on the ADCS Tools Main Toolbar to open the screen. The screen may be resized and relocated. The FPG8601 Run Screen should only be used to view FPG8601 status. Use of the Toolbar on this run screen may conflict with other ADCS-601 Tools functions. The FPG8601 Run Screen Toolbar should only be used during ADCS-601 start up or for advanced trouble shooting by qualified personnel. Figure 39. FPG8601 Run Screen 4. 3. 6. 3 PPC3 (FPG'S PRESSURE CONTROLLER) The PPC3 Run Screen provides more detailed information on the FPG8601 system's pressure controller and a Toolbar to control it directly. Use the [PPC3 Run Screen] button on the ADCS Tools Main Toolbar to open the screen. The screen may be resized and relocated. The PPC3 Run Screen should only be used to view PPC3 status. Use of the Toolbar on this run screen may conflict with other ADCS-601 Tools functions. The PPC3 Run Screen Toolbar should only be used for advanced trouble shooting by qualified personnel. There is no PPC3 Run Screen for the PG7601 system's PPC3 pressure controller because the PG7601 PPC3 is controlled by the PG7601, not by ADCS Tools. © 2005 DH Instruments, Inc. Page 80 4. PPC3 Run Screen 4. 3. 6. 4 RPM4 REFERENCE PRESSURE MONITOR The RPM4 Run Screen provides more detailed information on the RPM4's pressure controller and a Toolbar to control it directly. Use the [RPM4 Run Screen] button on the ADCS Tools Main Toolbar to open the screen. The screen may be resized and relocated. The RPM4 Run Screen should only be used to view RPM4 status. Use of the Toolbar on this run screen may conflict with other ADCS-601 Tools functions. The RPM4 Run Screen Toolbar should only be used for advanced trouble shooting by qualified personnel. Figure 41. RPM4 Run Screen Page 81 © 2005 DH Instruments, Inc. ADCS-601TM OPERATION AND MAINTENANCE MANUAL 4. 4 AUTOMATED TESTING ADCS Tools uses the engine of COMPASS for Pressure® calibration software to manage automated testing using ADCS-601. [. . . ] Indication of when conditions are present to make in tolerance pressure definitions based on specific criteria for each condition. Wood top bench onto which the system pressure stands are installed. PG7000 defines pressures at its reference level. Fluid head corrections correct the pressure relative to the reference level. [. . . ]