User manual FLUKE ADCS-601-AF

[. . . ] Operation and Maintenance Manual NSN 6695-01-534-6087 ADCS-601-AFTM Air Data Calibration Standard © 2005 - 2007 DH Instruments, a Fluke Company ADCS-601-AFTM OPERATION AND MAINTENANCE MANUAL Pressurized gases are potentially hazardous. Energy stored in these gases can be released unexpectedly and with extreme force. Pressurized systems should be assembled and operated only by personnel who have been instructed in proper safety practices. © 2005 - 2007 DH Instruments, a Fluke Company All rights reserved. Information in this document is subject to change without notice. [. . . ] Use the [FPG8601 Run Screen] button on the ADCS Tools Main Toolbar to open the screen. The screen may be resized and relocated. The FPG8601 Run Screen should only be used to view FPG8601 status. Use of the Toolbar on this run screen may conflict with other ADCS-601-AF Tools functions. The FPG8601 Run Screen Toolbar should only be used during ADCS-601-AF start up or for advanced trouble shooting by qualified personnel. Figure 39. FPG8601 Run Screen 4. 3. 6. 3 PPC3 (FPG'S PRESSURE CONTROLLER) The PPC3 Run Screen provides more detailed information on the FPG8601 system's pressure controller and a Toolbar to control it directly. Use the [PPC3 Run Screen] button on the ADCS Tools Main Toolbar to open the screen. The screen may be resized and relocated. The PPC3 Run Screen should only be used to view PPC3 status. Use of the Toolbar on this run screen may conflict with other ADCS-601-AF Tools functions. The PPC3 Run Screen Toolbar should only be used for advanced trouble shooting by qualified personnel. There is no PPC3 Run Screen for the PG7601 system's PPC3 pressure controller because the PG7601 PPC3 is controlled by the PG7601, not by ADCS Tools. © 2005 - 2007 DH Instruments, a Fluke Company Page 80 4. PPC3 Run Screen 4. 3. 6. 4 RPM4 REFERENCE PRESSURE MONITOR The RPM4 Run Screen provides more detailed information on the RPM4's pressure controller and a Toolbar to control it directly. Use the [RPM4 Run Screen] button on the ADCS Tools Main Toolbar to open the screen. The screen may be resized and relocated. The RPM4 Run Screen should only be used to view RPM4 status. Use of the Toolbar on this run screen may conflict with other ADCS-601-AF Tools functions. The RPM4 Run Screen Toolbar should only be used for advanced trouble shooting by qualified personnel. Figure 41. RPM4 Run Screen Page 81 © 2005 - 2007 DH Instruments, a Fluke Company ADCS-601-AFTM OPERATION AND MAINTENANCE MANUAL 4. 4 AUTOMATED TESTING ADCS Tools uses the engine of COMPASS for Pressure® calibration software to manage automated testing using ADCS-601-AF. Frequent reference is made to the COMPASS for Pressure User's manual for detail on setting up and running automated tests that is beyond the scope of this manual. The COMPASS for Pressure manual is an on-line manual available by pressing the [?] button, when available, in COMPASS features. It can also be accessed on the ADCS-601-AF system controller in the COMPASS for Pressure program group reached using the Windows START button , Programs. ADCS-601-AF has the capability to run automated tests. [. . . ] Fluid head corrections correct the pressure relative to the reference level. The pressure against which pressures are defined by the ADCS-601-AF system. Vacuum in absolute measurement mode; atmosphere in gauge measurement mode. Port to which the ADCS-601-AF system sets absolute or gauge pressure. [. . . ]