Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FLUKE MPG1 WITH RPM4. We hope that this FLUKE MPG1 WITH RPM4 user guide will be useful to you.
Lastmanuals help download the user guide FLUKE MPG1 WITH RPM4.
Manual abstract: user guide FLUKE MPG1 WITH RPM4INSTALLATION
Detailed instructions for use are in the User's Guide.
[. . . ] nipple into the center port of the three way tee. nipple into either of the end ports on the three way tee as shown in Figure 1. The thick nipple on the right connects to the MPG1. [. . . ] RPM4 A70M or less - install NPT adaptor into RPM4. RPM4s that have ranges of 70 MPa (10 000 psi) or less have 1/8 in. These ports require the use of one of the DH500F by 1/8 in. Wrap Teflon® thread tape around the NPT threads of the adaptor three times, and install the adaptor into the RPM4. Install the free end of the center nipple into RPM4 or PG7302: The center, thin, 5 in. nipple should be inserted into the test port of the RPM4 or PG7302. The nipple can be bent slightly to ensure that nipple enters straight into the test port. Do not tighten the gland in the RPM4 or PG7302 yet, since it will be tightened when the system is primed.
RPM4 Install glands and collars onto the 6 in. PG7302 Install glands and collars onto the 12 in. Install a DH500M to 1/8" NPT male adaptor in the DUT if necessary: The 1/8 in. NPT male adaptor can be used to connect the remaining thin 5 in. nipple to DUTs with 1/8 in NPT female ports. If you intend to use the adaptor, wrap Teflon® thread tape around the NPT threads three times and install it into the DUT. The DUT will be connected to the test line with the remaining thin 5 in. This nipple can be installed either in the 3-way tee, or in the port on top of the MPG1. The tube can be slightly bent if necessary. [. . . ] There are 3 loose fittings: one on the DUT, one on the RPM4 or PG7302, and the other on the plug. Tighten each of the loose fittings when oil without bubbles begins to flow through it.
The maximum operating pressure of the variable volume is 100 MPa (15 000 psi) in MPG1-100M and 200 MPa (30 000 psi) in MPG1-200M. Do not generate pressure greater than the maximum operating pressure.
High pressure fluids are potentially hazardous. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE FLUKE MPG1 WITH RPM4
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FLUKE MPG1 WITH RPM4 will begin.
