User manual FLYMO CONTOUR POWER PLUS

[. . . ] Never operate the product when you are tired, ill or under the influence of alcohol, drugs or medicine. The operator or user is responsible for accidents or hazards occurring to other people or their property. Do not operate whilst people, especially children or pets are in the area. ) with a tripping current of not more than 30mA is recommended. [. . . ] Switch off, remove plug from mains and examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Always wind cable carefully, avoiding kinking. Never pull on the cable to disconnect any of the plugs. Our products are double insulated to EN60335. Under no circumstance should an earth be connected to any part of the product. Mains cables and extensions are available from your local Husqvarna UK Ltd. While using your product always wear substantial footwear and long trousers. Before using the machine and after any impact, check for signs of wear or damage and repair as necessary. Inspect the area to be cut before each use. Remove all objects such as stones, broken glass, nails, wire, string etc, which can be thrown or become entangled in the trimmer head. If necessary, contact your local authority for disposal information. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product. Your product is uniquely identified by a silver and black product rating label. We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna UK Ltd. , through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing: (a) The fault is reported directly to the Authorised Repairer. (c) The fault is not caused by misuse, neglect or faulty adjustment by the user. (d) The failure has not occurred through fair wear and tear. [. . . ] * Failures as a result of sudden impact. * Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual. * Machines used for hire are not covered by this guarantee. * The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Nylon Line, Spool & Line * Caution! [. . . ]