User manual FLYMO VENTURER 370

[. . . ] FO T IN AN ce O RT e use P feren I M befor re re ad futu Re for tain & re IO M AT R N For all customer enquiries or for replacement parts, contact:- 01325 300303 www. flymo. com eop. customer. services@electrolux. co. uk ¤ 1 Safety Please Note :- This manual covers various products. Please read the user instructions carefully to fully identify, assemble and use the features that apply to your electric wheeled rotary lanwmower. If not used properly this lawnmower can be dangerous!This lawnmower can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this lawnmower. [. . . ] Ensure the upper handle is located correctly with the lock-off button on the switchbox uppermost 2. Ensure the upper handle and the lower handle are aligned correctly. Fit the bolts, washers and handle knobs. Fit the cable to the handles with the clips provided. Make sure the cable is not trapped between the handles. Grassbox Assembly F G Grassbox Assembly - Venturer 370. Insert the grassbox handle into the top of one of the grassbox halves. Press firmly down and forward until the handle clicks into position (F) 2. Turn the grassbox half over and insert screw into hole (as illustrated in fig F) and tighten fully. Locate grassbox upper into grassbox lower (G). Align clips, ensure all clips are correctly located. Ensure all clips are securely connected. Grassbox Assembly - RE420/RE420c Venturer 370 H location point clips 1. Insert the grassbox handle into the top of one of the grassbox halves. Press firmly down and forward until the handle clicks into position (F) 2. Turn the grassbox half over and insert screw into hole (as illustrated in fig F) and tighten fully. Position the two grassbox halves together and press each location point (H) into position without fully connecting the clips. When the location points are matched correctly firmly press the grassbox together until all clips are securely connected. (J) RE420 RE420c Fitting the Grassbox 1. To attach the grassbox to your lawnmower, lift the safety flap (K) and make sure the discharge chute is clean and free from debris. Locate fully assembled grassbox onto 2 location points at the rear of the deck. Locate safety flap onto the top of the grassbox. Ensure the grassbox is securely located. · Removal is the reverse procedure. · Please Note:- Ensure no gap remains between the safety flap and the grassbox. [. . . ] DL5 6UP Certify that a sample of the above product has been tested using directive 81/1051/EEC as a guide. The maximum Aweighted sound pressure level recorded at operator position under free field semi anechoic chamber conditions was :I, the undersigned M. Bowden of Electrolux Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. DL5 6UP Certify that a sample of the above product has been tested using ISO 5349 as a guide. [. . . ]