User manual FOCAL K2 POWER

[. . . ] Voice coil wound on Kapton former: Light-weight and highly durable material ensures no deformation of voice coil. butyl moulded rubber surround suspension: Long life characteristics , even in the most extreme climates. TN 52 with inverted tweeter dome: Inverted dome formed from titanium treated Tioxid 5 material. producing detailed high frequencies , acoustically rich and dynamic. [. . . ] These drive units should be fixed and sealed to the baffle or location panel. The use of the foam gasket is advisable for correct air sealing. For added performance, and to better reduce such unwanted vibrations and other acoustical losses, we recommend the use of "plain chant". Easily positioned behind the woofer, on the metal-work of the vehicle, Plain Chant soaks-up vibrations as well as acoustic reflections. Always ensure before that enough space is available for the magnet assembly, that it doesn't interfere with safety mechanisms or general working parts. In the case of not using the grilles supplied, it is important to ensure the speakers will fit correctly. Ensuring there is enough depth behind the speaker has already been explained, but enough thought must also be given for the forward movement of the cone and surround assembly. Woofer and woofer-midrange installation, simple steps (with grille) Either cut the required hole or use the correct hole of choice. Where necessary, carefully push in the four fixing clips to accept the fixing screws later. Carefully place the fixing ring, ensuring it lines-up with the holes or fixing clip positions. Fix the foam gasket to the back of the drive unit chassis. Add a small amount of glue where necessary, so it remains in the correct position (line-up holes). Lower the drive unit above the fixing ring, so it remains in the correct position (line-up holes). don't forget to connect up the cable to the connectors. Now lower the drive unit and screw in place, with the 4 screws provided. Crossover installation, simple steps First before any work is started it is necessary to remove the clear plastic lid (fig. Doing so enables access for adjustment, and fixing the unit in place. Remove, by pushing gently on the two shortest sides of the clear plastic lid. Never use a screwdriver to prise off the lid, otherwise damage will probably occur, not covered by the warranty. Once removed, fix in place with the 4 screws supplied. ensure the length of screw is suitable for the desired location. Always ensure the crossover is installed in a dry and vented area, without risk of humidity. [. . . ] Your Focal-JMlab product was developed and manufactured with high-quality materials and components which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment must be disposed of separately from normal garbage at the end of its operational lifetime. Please dispose of this product by bringing it to your local collection point or recycling centre for such equipment. This will help to protect the environment in which we all live. [. . . ]