User manual FORD LCF-2006

[. . . ] Table of Contents Introduction Vehicle Inspection Guide Instrument Cluster Warning and control lights Gauges 4 11 18 18 23 Entertainment Systems AM/FM stereo AM/FM stereo cassette AM/FM stereo with CD 26 26 28 31 Climate Controls Heater only Manual heating and air conditioning 36 36 38 Lights Headlamps Turn signal control Bulb replacement 40 40 46 46 Driver Controls Windshield wiper/washer control Steering wheel adjustment Power windows Mirrors Speed control 52 52 52 52 54 54 Locks and Security Keys Locks 58 58 58 1 Table of Contents Seating and Safety Restraints Seating Safety restraints Child restraints 61 61 62 66 Driving Starting Brakes Transmission operation Vehicle loading Trailer towing 73 73 76 79 86 89 Roadside Emergencies Getting roadside assistance Hazard flasher switch Fuses and relays Changing tires Jump starting Wrecker towing 93 93 93 93 100 100 105 Customer Assistance Reporting safety defects (U. S. only) 107 110 Cleaning Maintenance and Specifications Tilting/Lowering the cab Engine oil Engine Coolant Battery Air filter(s) Fuel information Lug Nut Torque Lubricant specifications Refill capacities 111 116 121 122 125 132 141 144 158 162 168 2 Table of Contents Scheduled Maintenance Guide Normal Scheduled Maintenance and Log Special Operating Conditions and Log Motorcraft Premium Gold Coolant Change Record 170 179 192 193 Index 195 All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. [. . . ] Do not disconnect the battery of the disabled vehicle as this could damage the vehicle's electrical system. Park the vehicles close to one another, making sure they do not touch, so the batteries on the right-hand frame rail behind the cab of your vehicle can be accessed for jump starting. Set the parking brake on both vehicles and stay clear of the engine cooling fan and other moving parts. Check all battery terminals and remove any excessive corrosion before you attach the battery cables. Ensure that vent caps are tight and level. Turn the heater fan on in both vehicles to protect any electrical surges. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery. ­ ­ ­ + ­ + + + 101 Roadside Emergencies 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery. 4. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle's engine, away from the battery and the carburetor/fuel injection system. Do not use fuel lines, engine rocker covers or the intake manifold as grounding points. Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. 5. Ensure that the cables are clear of fan blades, belts, moving parts of both engines, or any fuel delivery system parts. Start the engine of the booster vehicle and run the engine at moderately increased speed. Start the engine of the disabled vehicle. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables. 102 ­ ­ ­ ­ + + + + Roadside Emergencies Removing the jumper cables Remove the jumper cables in the reverse order that they were connected. Remove the jumper cable from the ground metal surface. Note: In the illustrations, lightning bolts are used to designate the assisting (boosting) battery. 2. Remove the jumper cable on the negative (-) connection of the booster vehicle's battery. 3. [. . . ] (3) Dana axle fluid replacement is required at every 60, 000 miles (96, 000 km) OR every year. (4) Motorcraft Premium Gold Engine Coolant is to be replaced at five years or 105, 000 miles (170, 000 km) for the first change, then every three years/45, 000 miles (72, 000 km) thereafter. (5) Replace drive belts if not replaced in the last 100, 000 miles (160, 000 km) during inspection. Labor description 6 7 8 9 10 years years years years years 82. 5 90 97. 5 105 112. 5 120 127. 5 135 142. 5 150 132 144 156 168 180 192 204 216 228 240 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 · · · Scheduled Maintenance Guide 183 184 11 12 13 14 15 years years years years years 157. 5 165 172. 5 180 187. 5 195 202. 5 210 217. 5 225 252 264 276 288 300 312 324 336 348 360 4200 4400 4600 4800 5000 5200 5400 5600 5800 6000 · · · · · · · · · · · · · · · · · · · · · · · · · Time in service Scheduled Maintenance Guide Labor description · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · Miles (x1000) Kilometers (x1000) Engine hours Change engine oil and replace oil filter (6 months or 7, 500 miles [12, 000 km] maximum service length) and lubricate cab latch, driveline U-joints and splines Replace engine and chassis mounted fuel filters Inspect and lubricate king pins, steering gear shaft, ball joints, door check straps, door and cab seals and door locks Inspect tires for wear, measure tread depth, check front wheel ends for play and noise and rotate front tires; rotate rear tires if unique conditions require (re-torque of rear lug nuts required 500 miles [800 km] after rotation or wheel removal) Inspect engine cooling system and hoses · Inspect brake pads, shoes, rotors, drums, brake lines · and hoses and adjust parking brake system Inspect drive and steering shaft boots · Inspect exhaust system and heat shields · Inspect drive belts Re-torque suspension U-bolts Inspect engine air filter. (Replace engine air filter every ·(1) two years, 52, 500 miles [84, 000 km] or as required by the air filter restriction gauge) · · · · · · ·(1) · · · · · · · ·(1) · · Time in service Miles (x1000) Kilometers (x1000) Engine hours Change automatic transmission fluid and external spin-on filter Lubricate front wheel bearings and replace wheel · · bearing grease seals (if not done during brake service in the last 30, 000 miles [48, 000 km]) Change power steering oil ·(2) ·(2) ·(2) ·(2) ·(2) (3) (3) (3) (3) Change rear axle fluid · · · · ·(3) (4) (4) Change Motorcraft Premium Gold Engine Coolant · · (Five years/105, 000 miles [168, 000 km] for first coolant change) Replace power steering filter · Replace front wheel bearings and grease seals Replace drive belt(s) (1) Air filter replacement is required at every 52, 500 miles (84, 000 km) OR every two years, whichever comes first. [. . . ]