User manual FOSTEX PD606

[. . . ] LOCATION RECORDER Model PD606 Owner's Manual Safety Instructions/Table of contents CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOND. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. "WARNING" "TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. " SAFETY INSTRUCTIONS 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. [. . . ] TC Out" item is set to "Gen", set it to "Repro" (see page 189 for details about how to set the "Sel. TC Out" item). <Note>: If the "Sel. TC Out" item is set to "Gen", always the internal TC generator time code is output from the [TIME CODE OUT] connector. In the "TC SETUP" menu, the following menu items regarding time code playback are available. 1) 2) 3) LTC start time setting ("Edit LTC start") -> page 191 Time code output setting in pause mode ("Pause TC") -> page 193 Userbit setting of repro. time code ("Rep TC Ubit") -> page 192 100 Location Recorder Model PD606 Chapter 5: Recording/Playback Skip / locate functions The PD606 offers comprehensive skip/locate functions. Skipping by file When more than one audio file is created on the current DVD-RAM disk (or hard disk partition), you can quickly skip to the beginning (ABS 0) of a desired track. By pressing the [ ] or [ ] key while the recorder is stopped, you can skip forward or backward to the beginning (ABS 0) of the previous or next file. Therefore, pressing the [ ] or [ beginning of the desired file. ] key as many times as required skips to the FILE PREV CUE NEXT LINK MASTER space ABC DEF LOCATE FILE CUE CIRCLE TAKE POWER ON OFF QUICK SET TIME FILE SEL LIGHT EXIT ENTER / YES 1 GHI 2 JKL 3 MNO CLEAR PREV CUE NEXT PRE REC 4 PQRS 5 TUV 6 WXYZ symbol ON OFF TONE OFF MIC JAM SLATE FALSE START PAUSE REC SHIFT MS R C4 L C3 6 C2 5 ST SOLO MONO 1 1/3/5+2/4/6 2 ST BUS TC SET DRV, PAT. CONTRAST BATT ACCESS MENU 3 READY TRK 4 C1 HDD DVD 7 8 9 0 PD606 LOCATION RECORDER MONITOR MIN MAX PHONES Skipping by cue point You can quickly skip to a desired cue point on the current audio file. By pressing the [SHIFT] key followed by the [ ] or [ ] key while the recorder is stopped, you can skip to the next or previous cue point. Therefore, pressing the [ cue point. ] or [ ] key as many times as required skips to the desired FILE PREV CUE NEXT SHIFT LINK MASTER space ABC DEF LOCATE FILE CUE CIRCLE TAKE POWER ON OFF QUICK SET TIME FILE SEL LIGHT EXIT ENTER / YES 1 GHI 2 JKL 3 MNO CLEAR PREV CUE NEXT PRE REC 4 PQRS 5 TUV 6 WXYZ symbol ON OFF TONE OFF MIC JAM SLATE FALSE START PAUSE REC SHIFT MS R C4 L C3 6 C2 5 ST SOLO MONO 1 1/3/5+2/4/6 2 ST BUS TC SET DRV, PAT. CONTRAST BATT ACCESS MENU 3 READY TRK 4 C1 HDD DVD 7 8 9 0 PD606 LOCATION RECORDER MONITOR MIN MAX PHONES Location Recorder Model PD606 101 Chapter 5: Recording/Playback Locating to the beginning (ABS 0) of a file While the recorder is stopped, pressing the [REW] key while holding down the [STOP] key locates to the beginning (ABS 0) of the current file quickly. 130 200 130 200 130 200 130 200 130 200 130 200 (Hz) 50 -12 -6 300 OFF -12 50 -6 300 OFF -12 50 -6 300 OFF -12 50 -6 300 OFF -12 50 -6 300 OFF -12 50 -6 300 OFF HPF REW STOP (dB/oct) DISC IN PANEL LOCK LOCK OFF REW F FWD PLAY STOP OPEN LOCATE REC END LOCATE ABS 0 Locating to the end (REC END) of a file While the recorder is stopped, pressing the [F FWD] key while holding down the [STOP] key locates to the record end position (REC END) of the current file quickly. 130 200 130 200 130 200 130 200 130 200 130 200 (Hz) 50 -12 -6 300 OFF -12 50 -6 300 OFF -12 50 -6 300 OFF -12 50 -6 300 OFF -12 50 -6 300 OFF -12 50 -6 300 OFF HPF F FWD STOP (dB/oct) DISC IN PANEL LOCK LOCK OFF REW F FWD PLAY STOP OPEN LOCATE REC END LOCATE ABS 0 Locating to the previous locate point While the recorder is stopped, pressing the [LOCATE] key locates to the position where you located last time. LOCATE LINK MASTER space ABC DEF LOCATE FILE CUE CIRCLE TAKE POWER ON OFF QUICK SET TIME FILE SEL LIGHT EXIT ENTER / YES 1 GHI 2 JKL 3 MNO CLEAR PREV CUE NEXT PRE REC 4 PQRS 5 TUV 6 WXYZ symbol ON OFF TONE OFF MIC JAM SLATE FALSE START PAUSE REC SHIFT MS R C4 L C3 6 C2 5 ST SOLO MONO 1 1/3/5+2/4/6 2 ST BUS TC SET DRV, PAT. CONTRAST BATT ACCESS MENU 3 READY TRK 4 C1 HDD DVD 7 8 9 0 PD606 LOCATION RECORDER MONITOR MIN MAX PHONES 102 Location Recorder Model PD606 Chapter 5: Recording/Playback Locating to the desired time You can locate the recorder to the desired position by specifying the time value. 1) While the recorder is stopped (or playing back), press any one of alphanumeric keys. The unit enters time edit mode and the EDIT TIME screen pops up on the display. LINK MASTER space ABC DEF LOCATE FILE CUE CIRCLE TAKE POWER ON OFF QUICK SET TIME FILE SEL LIGHT EXIT ENTER / YES 1 GHI 2 JKL 3 MNO CLEAR PREV CUE NEXT PRE REC 4 PQRS 5 TUV 6 WXYZ symbol ON OFF TONE OFF MIC JAM SLATE FALSE START PAUSE REC SHIFT MS R C4 L C3 6 C2 5 ST SOLO MONO 1 1/3/5+2/4/6 2 ST BUS TC SET DRV, PAT. CONTRAST BATT ACCESS MENU 3 READY TRK 4 C1 HDD DVD 7 8 9 0 PD606 LOCATION RECORDER MONITOR space ABC DEF MIN MAX 1 GHI 2 JKL 3 MNO PHONES 4 PQRS 5 TUV 6 WXYZ symbol 7 8 9 0 <Note>: The time value can be specified according to the time display mode selected before entering time edit mode. In the screen example above, you can specify the time value in LTC. 2) Enter the desired time value using the [MENU] dial (or alphanumeric keys). You can move the field to be edited using the [ ] / [ ] keys. Pressing the [CLEAR] key resets the time value to "00h 00m 00s 00sf". You can enter the time value between "00h 00m 00s 00f 00sf" and "23h 59m 59s **f **sf" (** depends on the frame rate of the audio file). 3) After entering desired time value, press the [LOCATE] key. The recorder quickly locates to the position at the specified time. <Note>: If you enter a time value which is out to the current file and press the [LOCATE] key, "Out of Zone" is shown and the locate operation is not executed. Location Recorder Model PD606 103 Chapter 5: Recording/Playback Locating to the desired cue point You can locate the recorder quickly to a desired cue point by selecting the cue point from the cue list. 1) While the recorder is stopped (or playing back), press the [CUE] key. The CUE LIST screen appears. CUE LINK MASTER space ABC DEF LOCATE FILE CUE CIRCLE TAKE POWER ON OFF QUICK SET TIME FILE SEL LIGHT EXIT ENTER / YES 1 GHI 2 JKL 3 MNO CLEAR PREV CUE NEXT PRE REC 4 PQRS 5 TUV 6 WXYZ symbol ON OFF TONE OFF MIC JAM SLATE FALSE START PAUSE REC SHIFT MS R C4 L C3 6 C2 5 ST SOLO MONO 1 1/3/5+2/4/6 2 ST BUS TC SET DRV, PAT. CONTRAST BATT ACCESS MENU 3 READY TRK 4 C1 HDD DVD 7 8 9 0 PD606 LOCATION RECORDER MONITOR MIN MAX PHONES 2) Use the [MENU] dial to select the desired cue point from the cue list, and press the [LOCATE] key. The unit quickly locates to the selected cue point and the display returns to the Home screen. <Note>: The recorder skips to the selected cue point as with described in "Skipping by cue point" on page 101. 104 Location Recorder Model PD606 Chapter 6: Advanced operations Chapter 6: Advanced operations Chapter 6 - Table of contents Auto copy function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Selecting a partition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Selecting auto copy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Making auto copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Disk copy function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Selecting source drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Making disk copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 File copy function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Selecting source drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Making file copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Dual drive recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Formatting in the "DDR" mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 Making Dual drive recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Data export to PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Connecting PC to the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 How to unmount the PD606 from the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Example of copying data to a computer hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Example of exporting data to a computer application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Location Recorder Model PD606 105 Chapter 6: Advanced operations Auto copy function When recording to an audio file on a partition of the PD606 hard disk drive, the auto copy function automatically copies the same audio file to a DVD-RAM disk. You can select the auto copy mode from the following two auto copy modes. Copy recording to a DVD-RAM disk is executed simultaneously when recording to a hard disk partition. The recording size of a take is limited to the capacity of the hard disk partition or DVD-RAM disk. Immediately mode <Note>: In this mode, if no DVD-RAM disk is set, the PD606 cancels the auto copy mode and returns to the normal recording mode. Immediately after the PD606 ends recording to the partition and stops, the copy starts. In this mode, even if no DVD-RAM disk is set when starting recording, you can start copying by setting a disk later. Back ground mode <Note>: If you turn off the PD606 before setting a DVD-RAM disk, the copy data is erased. <Note>: While the auto copy mode is "On" and a DVD-RAM disk is set to the DVD multi drive, if the partition you are going to record to is formatted in the "DDR" mode (for dual drive recording), dual recording takes priority to auto copy. <Note>: Editing the name or meta data of the file on the partition does not reflect to the data on the DVD-RAM disk. <Note>: Auto copy cannot be canceled by False start. Selecting a partition Select a partition to which audio data is recorded. 1) While the unit is stopped, press the [SHIFT] key to light [SHIFT] indicator, followed by the [FILE SEL/DRV. PAT] key. The display shows the "DRIVE SEL" screen. [. . . ] Damage to any product on which the original serial number has been defaced, modified or removed. Damage to or deterioration of the external cabinet. Damage occurring during shipment of the product. (NOTE: Shipping claims must be presented to the carrier. ) Damage resulting from accident, misuse, abuse or neglect. [. . . ]