User manual FOSTEX PM0.5 MK II SUB DATA SHEET

[. . . ] Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. [. . . ] The PM0. 5-Sub MK in combination with satellite speakers model PM0. 5 MK, was specifically engineered to fulfill all your critical near-field monitoring needs and is derived from years of experience Fostex has gained in the professional audio marketplace. The PM0. 5-Sub MK takes full advantage of a newly designed internal amplifier and employs a state of art design that utilizes high quality discrete bi-polar output devices. The 8" subwoofer was purposely designed for high output, ultra low distortion and incorporates the latest technologies and manufacturing techniques. Please take the time to go through this manual so that you may take full advantage of all the benefits of the Fostex PM0. 5-Sub MK Professional Studio Monitor Subwoofer. Unpacking Prior to unpacking your Fostex PM0. 5-Sub MK, carefully inspect the packing material for excessive damage. Once it has been determined that the packing material has not been compromised, carefully unpack the PM0. 5-Sub MK and inspect it for obvious damage. Fostex takes great care in designing packing materials that will sustain most shipping demands. If any damage is discovered during your inspection process, contact your Fostex dealer immediately. p-3 Setup Instructions The Fostex PM0. 5-Sub MK is designed to be operated with the Fostex PM0. 5 MK satellite speakers. Please follow the Fostex PM0. 5 MK Reference Manual to set up the satellite system. The PM0. 5-Sub MK is designed to be placed directly on the floor. The line level output connectors provided on the back panel for connecting to the Fostex PM0. 5 MK satellite speakers. Positioning of Subwoofer in the room drastically affects the overall frequency response and sound level of the system overall. Even a slight change of the Subwoofer's position can bring a significant difference in the frequency balance. A certain degree of testing and experimentation is often required to achieve the optimum positioning of the Subwoofer. Onse the studio monitor system is placed in the desired location, you should now connect the PM0. 5-Sub MK to the mixing console or digital workstation. Connection to the PM0. 5-Sub MK can be made via XLR or TRS connectors. The gain control on the back panel allows continuously variable adjustment to match most input types from -10dBV to +4dBu. The input is electronically balanced and is compatible with unbalanced sources that may require an adaptor. The connection of PM0. 5-Sub MK and the console/digtal workstation should be done in the following order. Step 1: Make sure that all equipment has been powered down. Step 2: Confirm that all gain controls, on the monitors and sources, are set to the minimum Setting. [. . . ] Once the power has been terminated, cleaning can be accomplished using a damp (not wet) cleaning rad. Do not use any abrasive or chemically harsh cleaning fluids. ADD: Zona Via Alla Ruenia, 37/43 64027-Sant'Omero (Teramo), Italy TEL: (+ 39) 0861-81241, FAX: (+39) 0861-887862 NAME: IEMKE ROOS AUDIO B. ADD: Kuiperbergweg 20, 1101 AG Amsterdam, The Netherlands TEL: (+31) 20-697-2121, FAX: (+31) 20-697-4201 <BELGIUM> <THE NETHERLANDS> <DENMARK> <FINLAND> <NORWAY> NAME: Siv. [. . . ]