User manual FOUR WINNS LIBERATOR

[. . . ] Please read this Operating Manual before you start operation of the CF Card Printer. The instructions contain important information and safety precautions. FOUR WINNS - General Management and employees Safety instructions To operate the CF Card Reader, pay attention to the safety instructions given below and in the individual chapters of this Operating Manual. Do not open the housing of the CF Card Printer. [. . . ] Have new CF card ready or copy data on this CF card to another data medium Insert CF card within 5 seconds and only remove when red LED goes out!press the format button briefly light up simultaneously 03 04 blinks rapidly CF card is full blink together 05 lights up Ready for formatting (only 5 seconds) incorrect log 06 alternate blinking 07 blinks rapidly incorrect CF card (e. g. wrong format) or defective CF card format or exchange CF card exchange CF card CF card capacity Warning!Despite the high memory capacity of the CF card, we recommend that you regularly back up the logs at least once a week on the computer. CF card almost full If the CF card can only save less than three more 300 sterilization logs, the green power LED begins to blink with brief interruptions. As soon as possible, save the sterilization logs on the CF card by copying them to your computer with the delivered card reader device. You can continue to save sterilization logs on the CF card until reaching the maximum number of logs which can be stored on the card. CF card full If the CF card is full, no more sterilization logs can be saved on it. In this case, the green power LED and the red data LED blink together with brief interruptions. Save the sterilization logs stored on the CF card by copying them to your computer with the delivered card reader device. 5 Chapter 3 ­ Initial start-up MELAflash CF Card Printer Chapter 3 ­ Initial start-up Connect MELAflash For the power supply, connect the cable of the delivered plug-in power supply unit to the right-hand socket (see 4, Fig. Connect the RS232 interface of the serial cable to the serial data connection of the autoclave. We recommend you to tightly screw both the knurled screws on the serial connection to avoid them from getting loose or inadvertently being pulled out. For more detailed information about connecting the serial cable, consult the Operating Manual. Insert the MELAflash CF card Insert the delivered MELAflash CF card into the slot on the front of the MELAflash CF Card Printer. Warning! Make sure the card is facing the right direction and do not use force to insert it into the slot. Navigate with the (+) or (-) KEY until the submenu displays Immediate printout Yes/ No. If the option is set to NO, press the (P) KEY to switch from Immediate Print NO to YES. In order to exit the menu, likewise press the (S) KEY. The MELAflash CF Card Printer is now ready for operation and sterilization logs can be saved on the CF card. Settings for the autoclave software version as of V4. 06 Switch the autoclave on with the power switch. Select the Setup Menu Function by short simultaneous pressing of the (+) and (-) KEYS. The display shows Function: Last Batch No. Navigate with the (+) or (-) KEY in the Menu Function, until the display 7 Chapter 3 ­ Initial start-up MELAflash CF Card Printer shows Function: Batch Output. Press (P) to select the submenu Batch output ­ Output medium Press the (P) KEY again. The display shows Output medium ­ No output medium, in case no out medium was yet selected. Navigate with the (+) or (-) KEY to where MELAflash is displayed as output medium. [. . . ] MELAview 2. 0 Demo version Before you decide to purchase MELAview 2. 0, FOUR WINNS offers you the opportunity of testing the program without charge. On the delivered CF Card there is a demo version of MELAview so that you can look at the functions of MELAview using fictive sterilization logs as examples. Please notice that the program will be deleted in case of formatting the CF card. Your FOUR WINNS dealer can also provide you with a demo version on CD ROM. [. . . ]