User manual FRANKE FTC 601BKGL

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual FRANKE FTC 601BKGL. We hope that this FRANKE FTC 601BKGL user guide will be useful to you.

Lastmanuals help download the user guide FRANKE FTC 601BKGL.


Mode d'emploi FRANKE FTC 601BKGL
Download
Manual abstract: user guide FRANKE FTC 601BKGL

Detailed instructions for use are in the User's Guide.

[. . . ] Gas burning appliances), a sufficient degree of aeration must be guaranteed in the room in order to prevent the backflow of exhaust gas. The kitchen must have an opening communicating directly with the open air in order to guarantee the entry of clean air. When the cooker hood is used in conjunction with appliances supplied with energy other than electric, the negative pressure in the room must not exceed 0, 04 mbar to prevent fumes being drawn back into the room by the cooker hood. € The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room). [. . . ] Clean and/or replace the Filters after the specified time period (Fire hazard). The Grease filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher. The Activated charcoal filter is not washable and cannot be regenerated, and must be replaced approximately every 4 months of operation, or more frequently for particularly heavy usage. "Failure to carry out cleaning as indicated will result in a fire hazard". Clean the hood using a damp cloth and a neutral liquid detergent. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Ty Documentation 1 Instruction Manual 12b EN 66 INSTALLATION Drilling the Support surface and Fitting the Hood SCREW FITTING • The hood support surface must be 135 mm above the bottom surface of the wall units. € Drill the support with a ø 4, 5 mm drill bit, using the drilling template provided. € Cut a hole ø 125 mm in size on the support surface, using the drilling template provided. • Fix using the 4 screws 12a (4 , 2 x 44 , 4) provided. 12a 125 • • • • SNAP-ON FITTING The hood can be installed either directly on the bottom surface of the wall units using snap-on side supports. Cut a fitted opening in the bottom surface of the wall unit, as shown. Insert the hood until the side supports snap into place. Lock in position by tightening the screws Vf from underneath the hood. Hood Type L1 45 360 50 410 55 460 60 510 70 610 80 710 90 810 262 15 L1 Vf CLOSING ELEMENT • The space between the edge of the hood and the rear wall can be closed by applying the element 20 provided, using the screws 12b. 135 20 12b EN 77 Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø120 mm, the choice of which is left to the installer. € Fix the pipe in position using sufficient pipe clamps (not supplied). • Remove any activated charcoal filters. ø 120 RECIRCULATION VERSION AIR OUTLET • Cut a hole ø 125 mm in any shelf that may be positioned over the hood. [. . . ] € Remove the filters one by one, after having disconnected the relative fastening elements. € Wash the filters, taking care not to bend them. (The colour of the filter surface may change throughout the time but this has no influence to the filter efficiency). € When refitting the filters, make sure that the handle is visible on the outside. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FRANKE FTC 601BKGL

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual FRANKE FTC 601BKGL will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag