User manual FREESTYLE PROTEGE DIGITAL

[. . . ] As the minute hand moves, you will be able to track the elapsed time of your dive or other activity. NOTE: After use in salt water or sand, always rinse the watch in fresh water and rotate bezel several times while immersed in fresh water. If your watch has an alarm function you can set the alarm by pulling out the 3 o'clock crown to position 1 and turning it in a clockwise direction. The shortest hand is usually the alarm hand. When the hand is set to the desired alarm time pull out the 2 o'clock crown to turn the alarm on. [. . . ] NYLON BAND CARE All FreeStyle® nylon watch bands are made from the highest quality material. They are washable in warm water and a mild liquid soap. Since your watch is water resistant, it is not necessary to remove the band from the watch when washing it. For stubborn stains, scrub with a small brush (i. e. If your nylon band has leather attached, apply a small amount of a good quality water and stain repellent leather care product to the leather portion before and after washing. NIGHT VISIONTM BACKLIGHTING If your FreeStyle® watch is equipped with the Night VisionTM backlighting feature, you can activate the light by pressing the button located on either the two o'clock or three o'clock position above the crown. On some watches, pushing the crown activates the light. The light will remain activated for as long as you hold the button. Additionally, some models feature a delay that will keep the light active for a brief period after you release the button. WARNING: Do not press the Night VIsionTM button while underwater. Although it is water-resistant in its normal position it will leak when pressed under water, and void your warranty. Failure to follow this step will cause the date to advance at 12 o'clock noon instead of 12 o'clock midnight. Set the correct time, and firmly push crown in as shown in position 1. CHRONOGRAPH MOVEMENTS RT pos. 1 pos. 3 1. Pull crown out to first "click" as shown in position 2. Turn the crown and set the date to one day before the actual date. This is important to ensure proper date advancement. If date does not advance, turn crown in opposite direction. Pull the crown out one more "click" as shown in position 3. Turn the crown clockwise, moving the watch hands until the correct date appears. Note that you are now in the AM mode and must advance the hour hand all the way past the 12 o'clock position to set PM time. Failure to follow this step will cause the date to advance at 12 o'clock noon instead of 12 o'clock midnight. [. . . ] MULTI-EYE MOVEMENT pos. 2 RB pos. 1 pos. 3 Date Setting 1. Pull out crown to first "click" as shown in position 2. Turn the crown clockwise to advance the date hand. Pull the crown out one more "click" as shown in position 3. If your watch is a chronograph, you can set the date and time according to the instructions on the "SETTING DATE AND TIME" section. [. . . ]