User manual FRIGIDAIRE FEB24S2ASB Owners Guide

[. . . ] This doesn't change the way it operates. Note: The time of day must first be set in order to operate the oven. BAKE PAD--Used to select the bake function. UP and DOWN ARROW PADS-- Used along with the function pads to select oven temperature, time of day, clean time and minute timer. BROIL PAD-- Used to select the variable broil function. TIMER ON/OFF PAD-- Used to set or cancel the minute timer. [. . . ] To view other functions, press the pad for dirección que se incluye a that function. To Change the Minute Timer while it is in use: While the timer is active and shows in the display, press and hold the UP or DOWN Spanish Owner's Guides ARROW pad to increase or decrease the time. Box 9061 To Cancel the Minute Timer before the set time has run out: Press TIMER ON/OFF. Dublin, Ohio 43017-0961 1 318200140 (0410) Rev. B Setting Oven Controls Note: The time of day must first be set in order to operate the oven. To Set or Change the Temperature for Baking The oven can be programmed to bake at any temperature from 170°F to 500°F. "-- -- --°" appears in the display. Within 5 seconds, press the UP or DOWN ARROW pad. The display will show "350°F. " By pressing and holding the UP or DOWN ARROW pad, the temperature can then be adjusted in 5°F increments. When the UP or DOWN ARROW pad is released, the oven will begin heating to the selected temperature. When the displayed temperature reaches the desired baking temperature, the control will beep once (1 time). To cancel the baking function, press CLEAR OFF pad. To Change the Oven Temperature after Baking has Started: 1. Press BAKE pad and make sure the bake temperature is displayed. Press the UP or DOWN ARROW pad to increase or decrease the set temperature. To Broil 1. [. . . ] Flour may be explosive. Failure Modes All failure modes give a visual and audible alarm. When display shows F1 (internal fault) or F3 (oven sensor circuit fault), the electronic oven control has detected a fault condition. [. . . ]