User manual FUJIFILM FINEPIX 2300

[. . . ] OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix2300 correctly. Please follow the instructions carefully. BB12371-200 (1) Warning For customers in the U. S. A. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] To exit the menu, use the "d" or "c" button to select "[ BACK" and then press the "MENU/OK" button. 8 (P. 71) No more than 999 prints can be specified on the same SmartMedia. 49 PLAYBACK MENU S DPOF DATE SETTING PLAYBACK MENU S DPOF FRAME SET/ RESET 1 2 1 2 This function allows you to select whether or not the date of shooting is included on the print. Press the "MENU/ OK" button to display the menu on the LCD monitor. Press "dc" button to select " DPOF". Use the "ab" button to select " DATE". Press "d" or "c" button to specify "DATE ON" Use or "DATE OFF". This setting is then valid for all the prints until the setting is changed. the "ab" button to select "FRAME SET/ RESET". Press the "MENU/OK" button. Use "d" or "c" to select the frame to be specified. 4 !G Up to 99 prints can be specified for each frame, and the maximum number of frames for which prints can be specified on one SmartMedia is 999. G "TOTAL" shows the total number of prints specified. !G To exit the menu, use the "d" or "c" button to select "[BACK" and then press the "MENU/OK" button. specifying any other settings, first specify whether date is to be shown or not. G If you switch the camera off after selecting "DATE ON", the setting reverts to "DATE OFF". !G To exit the menu, use the "d" or "c" button to select "[BACK" and then press the "MENU/OK" button. 51 PLAYBACK MENU S DPOF FRAME SET/ RESET PLAYBACK MENU S DPOF SET ALL / RESET ALL 3 4 1 2 Use "a" or "b" to specify the number of prints. !G The setting is not saved until you press the "d" or "c" button to move to another frame or press the "MENU/OK" button. G If you do not want a print of the frame, set (reset) the number of prints to "00 SHEETS". When you have completed the settings, always press the "MENU/OK" button to confirm the settings. The total number of prints is displayed on the LCD monitor and you are returned to the menu. The " " icon and the number of prints is displayed for confirmed frames and, if the date has been set, the " " icon is also displayed. Use "a" or "b" to select "SET ALL" or "RESET ALL". Press the "MENU/OK" button. !G "SET ALL" specifies 1 print for all the images. G The settings specified for individual frames When you press the "MENU/OK" button, a confirmation screen appears. To proceed with the set or reset operation, press "MENU/OK". The total number of prints is displayed on the LCD monitor and you are returned to the menu. 4 52 To specify DPOF settings for another frame, repeat the procedure from step 2 . !G If you do not press the "MENU/OK" button, after 10 seconds the menu screen reappears. The settings for the last selected frame are discarded. are cancelled. [. . . ] The use of other power sources can cause a fire. If the battery leaks and fluid gets into your eyes or comes into contact with your skin or clothing, this can cause injury or loss of eyesight. Immediately flush the affected area thoroughly with clean water and seek medical treatment. When discarding or storing batteries, cover the battery terminals with insulation tape. [. . . ]