User manual FUJIFILM FINEPIX 2800 ZOOM

[. . . ] This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix2800 ZOOM correctly. Please follow the instructions carefully. BL00071-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] 2Use "d" or "c" to select "gERASE" and then use "a ([)" or "b (])" to select "FRAME", "ALL FRAMES" or "FORMAT". 3Press the "MENU/OK" button. A confirmation message appears. In "FRAME" mode, use "d" or "c" to select the file and then press the "MENU/OK" button. When using "ALL FRAMES" or "FORMAT", press the "MENU/OK" button. 4 !G Press the "BACK" button to exit the menu. 56 !G If a "", "§", "·" or "­" message appears, see P. 83, 84. Formatting erases all the data on the SmartMedia, including protected files. !G To cancel the frame erase procedure, press the "BACK" button. 57 PLAYBACK MENU f HOW TO SPECIFY PRINT OPTIONS (DPOF) 1 PLAYBACK MENU f DPOF DATE SETTING 1 0 2 0 DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications for images shot using a digital camera on media such as SmartMedia. The recorded specifications include information on which frames are to be printed and how many prints of each frame are required. This section gives a detailed description of how to order your prints with the FinePix2800 ZOOM. On the FinePix2800 ZOOM, you can specify only one print per image in the DPOF settings. Note that some printers do not support date and time imprinting or specification of the number of prints. Note that the warnings shown below may be displayed while you are specifying the prints. ¢ (P. 85) If the "¢" message appears, you cannot erase the frame. Cancel the "DPOF" settings and then try again 2 1 0 2 0 ^ (P. 85) No more than 1000 frames can be specified on the same SmartMedia. This function allows you to select whether or not the date of shooting is included on the print. 1Press the "MENU/OK" button to display the menu on the screen. 2Use "d" or "c" to select "fDPOF". 1Use "b" (]) to select "kDATE". 2Use "d " or "c " to specify "DATE ON" or "DATE OFF". The selected setting is then valid for all frames with DPOF settings until the camera is switched off. Then specify the DPOF settings (P. 60). 4 !G The 58 "DPOF" menu options do not appear when a movie file is selected. G You may not be able to specify DPOF settings for some still shots taken on other cameras. !G You must specify whether or not the date is included before you specify the DPOF settings. 59 PLAYBACK MENU f DPOF SET FRAME 2 0 1 13 00 2 1 0 3 1 0 2 0 4 2 0 When you have finished specifying the DPOF settings, always press the "MENU/OK" button to confirm the settings. [. . . ] This icon indicates that personal injury or material damage can result if the information is ignored. The icons shown below are used to indicate the nature of the information which is to be observed. Triangular icons notify the user of information requiring attention ("Important"). Circular icons with a diagonal bar notify the user that the action indicated is prohibited ("Prohibited"). Filled circles with an exclamation mark notify the user of an action that must be performed ("Required"). 92 93 Safety Notes CAUTION Keep out of the reach of small children. [. . . ]