User manual FUJIFILM FINEPIX 40I

[. . . ] This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix40i correctly. Please follow the instructions carefully. BB11754-200(1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Trimming cannot be selected if you are playing back images with other file sizes. You can alternate between the Zoom and Shift screens by pressing the "DISP" button. Using the Zoom screen: Use the "ab ( )" button to zoom in and out. Using the Shift screen: Use the "a b ( )", "c" and "d " buttons to shift the position of the area to be trimmed. When you press the "MENU/OK" button, the cropping settings are determined as shown in the image on the LCD monitor. Use the "ab ( )" button to specify the number of prints. Press the "MENU/OK" button to confirm the settings and return to the menu screen. The "J" icon is displayed for the frame for which trimming has been confirmed. 4 !G Cropping cannot be specified for 640 × 480 pixel images. 69 PLAYBACK MENU [ DPOF FRAME SET/RESET 1 G G 2 G G 3 G G 4 Use the "ab( )" button to select "FRAME SET/RESET". Press the "MENU/OK" button. Use "d " or " c " to select "FRAME SET" or "RESET". Press the "MENU/OK" button. Selecting FRAME SET Use !G Before 70 specifying FRAME SET, always specify whether the date is set. G Specifying "SET ALL" after FRAME SET or TRIMMING erases the trimming settings and the number of frames for which FRAME SET is specified. !G Multi-frame playback is an easy way to select images to be printed (P. 34). "d" or "c" to display the frame for which you want to specify DPOF settings. Use "a( )" or "b( )" to specify the number of prints. !G You can specify up to 99 prints for each frame. Also, To continue using FRAME SET, repeat steps G and G. If you select FRAME SET, proceed to step 3 . If you select RESET, proceed to step 6 . the maximum number of frames that can be specified for printing on the same SmartMedia is 999. <To Apply the Settings> When you have finished specifying the DPOF settings, always press the "MENU/OK" button to confirm the settings. The total number of prints appears on the LCD monitor and the menu screen reappears. The " K " icon and the number of prints is displayed for the frames for which settings have been confirmed. If the date has been set, the " H " icon is also displayed. 4 !G "TOTAL" shows the total number of prints specified. 71 PLAYBACK MENU [ DPOF FRAME SET/RESET PLAYBACK MENU [ DPOF SET ALL/RESET ALL 5 6 7 1 G G <To Cancel the Settings> Pressing the "BACK" only cancels the setting for the currently selected frame. You cannot cancel settings for frames other than the currently selected frame. Selecting FRAME RESET You can use "d" or "c" to check only those frames for which the number of prints has been set. [. . . ] This could cause you to fall over or have a traffic accident. Do not heat, modify or attempt to disassemble the batteries. Do not drop or subject the batteries to impacts. Do not attempt to recharge lithium or alkaline batteries. Do not store the batteries with metallic products. [. . . ]