User manual FUJIFILM FINEPIX A101

[. . . ] BL00034-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] 2Use "d" or "c" to select "fDPOF". 3With "OK" selected, press the "MENU/OK" button. 1If you select a frame for which DPOF settings have already been specified, the "º" message appears. 2Pressing the "MENU/OK" button erases all the DPOF settings already specified. You must then specify the DPOF settings again. 4 !G You can only specify one print per frame in the DPOF settings. Note also that you can specify prints for up to 999 frames on the same SmartMedia. 50 !G The DPOF menu options do not appear when a movie file is selected. G You cannot specify printing for more than one print per frame. !G Press the "BACK" button to leave the previous settings unchanged. G You can check the previous settings by playing back the images (P. 26). !G DPOF settings cannot be specified for movies. G Note that the "k" icon is not displayed during playback. G "TOTAL" shows the total number of frames for which prints have been ordered. To specify additional DPOF settings, repeat steps 0 1 and 0 and select "SET" for the frames to be printed. 2 Pressing the "MENU/OK" button confirms all the To specify additional DPOF settings, repeat settings. You cannot reset a portion of the steps 0 and 0 and select "SET" for the frames 1 2 settings without to be printed. resetting them all. 51 5 Settings I List of settings 4 Still Image mode 1 AUTO 2 MANUAL j FILE SIZE (P. 54) SETTINGS USING THE OPTION MENU 13 00 2 0 Using SET­UP The "Settings" chapter looks at functions available from "dOPTION" in the "q" still Image, "e" movie and "3" playback. 1 0 h Movie mode -- -- -- SET­UP LCD BRIGHTNESS (P. 55) 2 0 3 Playback mode -- -- -- SET­UP LCD BRIGHTNESS (P. 55) Photography Playback SET­UP LCD BRIGHTNESS (P. 55) I SET­UP menu options Settings Display Factory default Explanation This is a function that reduces power consumption and then automatically switches the camera off to prevent battery depletion when the camera is not being used. You can use this to set the date and time. This setting selects the volume of the beep emitted by the camera during camera operation. Select English or French as the language used for screen display. POWER SAVE ON/OFF ON USB MODE DATE/TIME BEEP T LANGUAGE DSC/PC CAM SET 3 LOW/HIGH/OFF ENGLISH/FRANCAIS DSC -- LOW ENGLISH 1Press the "MENU/OK" button to display the menu screen. 2Use "d" or "c" to select "dOPTION" and "a" or "b" to select the desired setting. 3Press the "MENU/OK" button to move to the selected setting. If you selected "SET­UP", the "SET­UP" screen appears. [. . . ] Use only the batteries or AC power adapter specified for use with this camera. The use of other power sources can cause a fire. If the battery leaks and fluid gets into your eyes or comes into contact with your skin or clothing, this can cause injury or loss of eyesight. Immediately flush the affected area thoroughly with clean water and seek medical treatment. [. . . ]