User manual FUJIFILM FINEPIX A202

[. . . ] 2. 0 Getting Ready Basic Photography Advanced Features Photography Advanced Features Playback Settings Software Installation Camera Connection 7 8 Using FinePixViewer BL00173-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] If you click the [No] button, the software is not installed. In Windows Media Component Setup window, tick the "I have read the Privacy Statement" checkbox and then click the [Next >] button. When you click the [Finish] button, your PC is restarted. 6 If the "Connection speed" window appears, set the correct speed for your environment of connection and then click the [Next] button. If you do not know your connection speed, simply click the [Next] button. 70 71 12. After you restart your PC, install DirectX as directed by the on-screen instructions and then restart your PC again. If the latest version of DirectX is already installed on your PC, this installation is not performed. After you restart your PC, the "FinePixViewer installation completed" message appears. Click "Using FinePixViewer" to view the basic FinePixViewer functions. 15. Proceed with the installation as directed by the on-screen instructions. 6. 3 Installation on a Mac OS 8. 6 to 9. 2 6. 3. 1 Check the system software settings Enable File Exchange Check whether File Exchange is active. To use an xD-Picture Card that is supported by the camera, the File Exchange utility supplied with Mac OS must be running. 2. Double-click "Installer for MacOS8. 6-9. x" to launch the Installer. Click the [Installing FinePixViewer] button. For more information on what is installed, click the [Read Me First] button and [Using FinePixViewer] button. To install Acrobat Reader later. . . 1. Open the "My Computer" window, right-click the CD-ROM icon and select "Open" to view the contents of the CD-ROM. 1. Switch on your Macintosh and start up Mac OS 8. 6 to 9. 2. NOTE Do not connect the camera to your Macintosh until the software installation is completed. 2. Double-click "ACROREAD" "ENGLISH" folder. Proceed with the installation as directed by the on-screen instructions. 2. Select the Extension Manager in the Control Panel and check that the File Exchange check box is ticked. If not, click in the box so that an appears and then restart your Macintosh. 14. To install Acrobat Reader, click "Install Acrobat Reader". You should install Adobe Systems' Acrobat Reader software to read the FinePixViewer User's Guide (PDF). If you already have the latest version installed, this step is not required. 6. 3. 2 From FinePixViewer installation to restart 1. When you load the enclosed CD-ROM into the CD-ROM drive, the "FinePix" window automatically opens. NOTE If the "FinePix" window does not open automatically, double-click the CD-ROM icon. 4. A confirmation message appears asking whether you want to continue with the installation. [. . . ] EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES PRODUCT "AS IS" AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS, INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY, MARCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. You acknowledge that neither Software nor any part thereof, will be transferred, or exported to any country or used in any manner in violation of any export control laws and regulations to which Software is subject. [. . . ]