User manual FUJIFILM FINEPIX A310

[. . . ] Getting Ready Using the Camera Advanced Features Settings Software Installation This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix A310 correctly. Please follow the instructions carefully. Viewing Images BL00254-201(1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. EC Declaration of Conformity to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] You should copy important frames (files) that you do not want to be erased to your computer or another media. FRAME Erase only the selected frame (file). !G To cancel erasing of all the frames while it is still in progress, !G Protected Advanced Features BACK Returns to playback without erasing any frames (files). press the "BACK" button. Unprotect the frames before erasing them (P. 46). If the "" message appears, press the "MENU/OK" button again to erase the files. 1 30 2 0 1 Press "a" or "b" to select "ALL FRAMES" or "FRAME". 2 Press the "MENU/OK" button. N To stop the procedure mid-way N Press the "BACK" button to stop erasing all the frames. Some unprotected files will be left unerased. !G Even if you stop the procedure immediately, some files will be erased. 44 45 PLAYBACK MENU i PROTECTING IMAGES FRAME, SET ALL, RESET ALL 2 0 1 Set the Mode dial to "w". 2 Press the "MENU/OK" button to display the menu screen. Protection is a setting that prevents frames (files) from being accidentally erased. However, the "FORMAT" function erases all the frames (files), including protected frames (files) (P. 52). 1 10 FRAME RESET 1 Press "d" or "c" to select the protected file. 2 Press the "MENU/OK" button to unprotect the displayed file. 1 0 2 0 !G It may take a while for excuteing this function depending on the number of images. 2 Press "d" or "c" to select "i" PROTECT. RESET ALL Removes the protection from all the frames (files). SET ALL Press the "MENU/OK" button to protect all the files. SET ALL Protects all the frames (files). FRAME Protects or unprotects only the selected frame (file). Advanced Features 1 30 2 0 1 Press "a" or "b" to select "FRAME", "SET ALL" or "RESET ALL". 2 Press "MENU/OK" button to confirm your selection. !G It may take a while for excuteing this function depending on the number of images. RESET ALL Press the "MENU/OK" button to unprotect all the files. 4 1 0 2 0 FRAME SET 1 Press "d" or "c" to select the file to be protected. 2 Press the "MENU/OK" button to protect the file currently displayed. To protect another file, repeat steps 1 and 2. To finish protecting files, press the "BACK" button. N To stop the procedure mid-way N If large number of images are recorded in the xDPicture Card, protecting or unprotecting all the frames may take some time. If you want to shoot a picture or a movie during the procedure, press the "BACK" button. To then return to protecting or unprotecting all the frames, start the procedure on P. 46 from step 1. 46 47 PLAYBACK MENU g AUTO PLAY (AUTOMATIC PLAYBACK) 2 0 1 Set the Mode dial to "w". 2 Press the "MENU/OK" button to display the menu on the screen. 1 10 4 Settings 1 10 2 0 6 ADJUSTING THE MONITOR BRIGHTNESS 1 Set the Mode dial to "q", "?", "w" or "r". 2 Press the "MENU/OK" button to display the menu on the screen. !G The Power Save function does not operate during playback. When the preview movie or movie ends, playback moves on to the next frame. 1 20 3 0 1 Press "d" or "c" to select "g" PLAYBACK. [. . . ] When an xD-Picture Card is removed, the card may fly completely out of the slot. Use your finger to stop the card from flying out before removing the card. If an xD-Picture Card is allowed to fly out, it could hit someone and cause injury. Request regular internal testing and cleaning for your camera. [. . . ]