User manual FUJIFILM FINEPIX A345

[. . . ] 1 2 3 4 5 6 OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix A345 / FinePix A350 correctly. Please follow the instructions carefully. Getting Ready Using the Camera Advanced Features Settings Software Installation Viewing Images BL00453-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. EC Declaration of Conformity to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] When 2 0 the camera settings are "q RESET", the frame number setting ("CONT. " or "RENEW") is changed to "CONT. " and the frame number itself does not return to "0001". When the xD-Picture Card already contains image files with file numbers higher than the highest file number on the last xD-Picture Card, images are stored beginning from the highest file number on the current xD-Picture Card. 100-0009 3 1 0 T I ME D I FFERENCE 1 Press "d" or "c" to select +, ­, hour and minute. 2 Press "a" or "b" to correct the setting. : 45 10 : 4 5 AM CANCEL Directory number File number Frame number 2/ 24 / 2005 10 : 0 0 AM Check the file number by viewing the image. The last 4 digits of the 7-digit number in the top right corner of the LCD monitor are the file numbers, while the first 3 digits show the directory number. 4 Settings 00 2/ 24 / 2005 SET h Available time setting ­23:45 to +23:45 (in 15-minute increments) ! When 2 0 changing the xD-Picture Card, always turn the camera off before opening the battery cover. Opening the battery cover without turning the camera off may cause the frame number memory to not function. Once 9999 is exceeded, the directory number changes from 100 to 101. The displayed frame number may differ for images photographed on other cameras. When "t" appears, see P. 82. 4 56 Always press the "MENU/OK" button after the settings are completed. 57 5 Software Installation 5. 1 INSTALLATION ON A Windows PC Do not connect the camera to your PC until the software installation is completed. Pre-installation checklist Hardware and software requirements To run this software, you must have the hardware and software described below. Check your system before you begin the installation. Operating System1 Windows 98 (including the Second Edition) Windows Millennium Edition (Windows Me) Windows 2000 Professional2 Windows XP Home Edition2 Windows XP Professional2 200 MHz Pentium or better recommended (800 MHz Pentium III or better recommended for Windows XP) 64 MB minimum (128 MB minimum for Windows XP), 256 MB or better recommended Amount required for installation: 450 MB minimum Amount required for operation: 600 MB minimum 800 × 600 pixels or better, 16-bit color or better i To use FinePix Internet Service or mail attachment function: An Internet connection and e-mail transmission software is needed i Connection speed: 56 k or better recommended 1 Install FinePixViewer as instructed in the Quick start guide. Launching the installer manually 1 Double-click the "My Computer" icon. Windows XP users should click "My Computer" in the "Start" menu. 2 Right-click "FINEPIX" (CD-ROM drive) in the "My Computer" window and select "Open". 3 Double-click "SETUP" or "SETUP. exe" in the CD-ROM window. CPU RAM Hard disk space Display Internet connection3 The way file names are displayed differs as described below depending on your PC settings. i File extensions (3-letter suffixes indicating the file type) may be shown or hidden (e. g. i Text may be shown normally or all in uppercase (e. g. Setup or SETUP). 1 Models with one of the above operating systems pre-installed. 2 When you install the software, log in using a system administrator account (e. g. 3 Required to use the FinePix Internet Service. The software can still be installed even if you do not have an Internet connection. 2 3 After restarting the PC, install DirectX as directed by the on-screen instructions and then restart your PC again. If the latest version of DirectX is already installed on your PC, this installation is not performed. ! If the latest version is already installed, this window does not appear. Do not remove the CD-ROM during this procedure. After restarting the PC, a message appears stating the "Installation of the FinePixViewer has been completed". Notes i Connect the camera directly to the PC using the USB cable (mini-B). The software may not operate correctly when you use an extension cable or connect the camera via a USB hub. i When your PC has more than one USB port, the camera can be connected to either port. [. . . ] Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. Keep out of the reach of small children. This product could cause injury in the hands of a child. Do not place heavy objects on the camera. [. . . ]