User manual FUJIFILM FINEPIX F700

[. . . ] Getting Ready Using the Camera Advanced Features Settings Software Installation This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix F700 correctly. Please follow the instructions carefully. Viewing Images BL00247-200(1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. EC Declaration of Conformity to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Press the "MENU/OK" button to confirm the setting. 3 13 1 00 2 0 AF AREA Hold down the "C-AF" button 1 and press "fg" to move the ":" (target point) 2 to the desired focusing position. 3 Release the "C-AF" button. !G The specified custom white balance is retained until it is reset. G After you take the picture, you should check the "Color (White Balance)" setting for the image. i Set "IMAGE DISP. " in the SET­UP menu to "PREVIEW" (P. 70). i Set the Power switch to "w" (P. 25). Before moving After moving or If "" or "" is displayed, the white balance was not measured at the correct exposure. Set the exposure compensation again, using a negative value (­) if "" is displayed and a positive value (+) if "" is displayed. 2 The AF frame is displayed in the location to which the target point was moved. Press the shutter button down halfway and take the shot normally. To reposition the AF frame, repeat step 1. + FOCUS MODE MF (Manual Focus) Use manual focus for subjects that are not suitable for Auto Focus or where you want the focus fixed for a shot. Regardless of the AF frame location, the exposure is always set using the area in the center of the screen. To expose the shot for your main subject, use AE lock. Advanced Features 1 0 2 0 Near Far MF (Manual Focus) 1 Hold down the "C-AF" button and 2 press "g" to adjust the focus. "c": Moves the focus further away. "d": Moves the focus closer. AF AREA You can change the position on the screen where the camera focuses. Use this feature when you have composed your shot using a tripod and then want to change the focusing position. AF (CENTER) The camera focuses on the center of the screen. In B photography mode, you can use the Photometry/Focus mode button to select "AUTO (automatic recognition)" or "AF(CENTER)" (P. 23). N Mastering Manual Focusing N Use a tripod to prevent the image from becoming unfocused when the camera moves. AUTO The camera automatically recognizes the subject in the central area of the screen and adjusts the focus accordingly (P. 23). N One-touch AF Function N 1 0 2 0 Bebeep When you select area-selection AF AREA or manual focus, the LCD monitor cannot be switched off. Use this function when you want to manually focus a shot quickly. 1 Hold down the "C-AF" button and 2 press the shutter button down halfway to focus the shot using Auto Focus. AF (CENTER) The camera focuses on the center of the screen. This is a useful feature when used for shots using AF/AE lock (P. 56). 54 55 PHOTOGRAPHY MENU PHOTOGRAPHY MENU j AUTO BRACKETING In shots composed in this way, the camera may be unable to focus on the subject (the 2 women in this case). Set the focus mode to "AF (CENTER)" and take the shot using AF/AE lock. N, M, <, >: See P. 54. USING AF/AE LOCK 1 1 Use this feature to photograph the same image with different exposure settings. Auto bracketing automatically shoots 3 consecutive frames, one of which is correctly exposed while the remaining two are underexposed and overexposed respectively by a set amount. h The three available settings are ±1/3 EV, ±2/3 EV and ±1 EV. See P. 101 for more information on EVs. !G If 2 Move the camera slightly so that one of the subjects is in the AF frame. the underexposed or overexposed frame is outside the camera's control range, the shot is not taken with the specified setting increments. However, if there is insufficient space on the xD-Picture Card for 3 shots, no picture will be taken. 1 20 2 0 After setting the exposure for bracketing, hold down the "f" button 1 and press "g" 2 to select "j". 3 Bebeep When you press the shutter button down halfway, the camera emits a short double-beep and focuses on your subject. [. . . ] Request regular internal testing and cleaning for your camera. Build-up of dust in your camera can cause a fire or electric shock. h Contact your FUJIFILM dealer to request internal cleaning every 2 years. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. Unplug from power socket. WARNING This icon indicates that death or serious injury can result if the information is ignored. This icon indicates that personal injury or material damage can result if the information is ignored. CAUTION The icons shown below are used to indicate the nature of the information which is to be observed. [. . . ]