User manual FUJIFILM FINEPIX V10

[. . . ] 1 2 3 4 5 6 OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix V10 correctly. Please follow the instructions carefully. Getting Ready Using the Camera Advanced Features Settings Software Installation Viewing Images BL00515-200 (1) WARNINGS To reduce the risk of fire or electric shock, do not expose the AC power adapter to rain or moisture. The AC power adapter should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should be placed on the AC power adapter. Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE IMPORTANT SAFETY INSTRUCTIONS hRead these instructions. hDo not block any ventilation openings, Install in accordance with the manufacturer's instructions. [. . . ] You must zoom beforehand as you cannot zoom during recording. h Optical zoom focal length (35 mm camera equivalent) Approx. 60 cm (2. 0 ft. ) to infinity 3 Advanced Features Images that can be trimmed You cannot trim images that were shot with a camera other than FinePix V10. 13s 70 Continued 71 MOVIE MODE r RECORDING MOVIES Press the shutter button down fully to start recording. p PHOTO MODE MOVIE QUALITY SETTINGS IN MOVIE MODE 2 0 1 Set the Mode switch to "r". 2 Press the "p" button to display the menu on the LCD monitor. 4 1 10 ! The brightness and color of the LCD monitor shown during movie recording may differ from those shown before recording begins. There is no need to hold down the shutter button. Camera operation noises may be recorded during movie shooting. ! In "r" Movie mode, do not set the "" (sensitivity) setting. In "r" Movie mode, do not set the "" FinePix COLOR setting. The quality setting is retained even when the camera is turned off or the mode setting is changed. Pressing the shutter button down fully fixes the focus, however, the exposure and white balance are adjusted to the scene being shot. 2 QUALITY : Press "c". 5 REC 7s During recording, "yREC" appears on the LCD monitor and a counter that shows the remaining time appears in the top-right corner of the LCD monitor. ! If the brightness of the subject changes during movie recording, the sound of lens operation may be recorded. Some wind noise may be recorded in shots taken outdoors. When the remaining time runs out, recording ends and the movie is saved onto the xD-Picture Card. PHOTO MODE 6 Press the shutter button down halfway during recording, the recording ends. 1 30 2 0 1 Press "a" or "b" to change the setting. 2 Press the "MENU/OK" button to confirm the setting. 3 Advanced Features ! If recording is stopped immediately after it begins, 1 second of the movie is recorded onto the xD-Picture Card. 640x480: : 13s Available recording times Recording times per xD-Picture Card These figures are the available recording times using a new xD-Picture Card formatted on the camera. The actual recording times will vary depending on the free space available on the xD-Picture Card. PHOTO MODE Quality % (30 frames per second) 16 MB 32 MB 64 MB 128 MB 256 MB 512 MB 1 GB 13 sec. 14. 9 min. $ (30 frames per second) 26 sec. 29. 3 min. Quality settings in Movie mode Quality mode Sample uses For better quality To record longer movies % (640 480) $ (320 240) If you shoot using the xD-Picture Cards with model numbers containing ">" such as "DPC-M1GB", movie recording time may be reduced if you repeatedly record and erase (frame erase) image files. In such a case, erase all frames or format the picture card before use. Back up important frames (files) onto your PC or another media. 72 73 PLAYBACK MODE PLAYING BACK MOVIES 2 0 1 Press the "w" button to turn the camera on in Playback mode. 2 Press "d" or "c" to select the movie file. 1 10 Adjusting volume of movies Volume can be controlled while playing back movies. Adjust the volume to suit your condition. 1 ! Movies PLAY cannot be played back using multi-frame playback. [. . . ] This can cause the heavy object to tip over or fall and cause injury. Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the power cord or cables and cause a fire or electric shock. [. . . ]