User manual FUJIFILM FINEPIX F402

[. . . ] Getting Ready Basic Photography Advanced Features Photography Advanced Features Playback Settings Software Installation Camera Connection 7 8 Using FinePixViewer F402 BL00182-200 (1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Check the taskbar, move the message window and then click the [Cancel] button. 6 3. Load the enclosed CD-ROM into the CD-ROM drive. The installer starts up automatically. 76 77 2. A confirmation message appears asking whether you want to continue with the installation. Install QuickTime as directed by the onscreen instructions. If you have already installed QuickTime version 5. 0. 2 or later, this installation is not performed. 7. Install NetMeeting as directed by the onscreen instructions. If NetMeeting 3. 01 or later is already installed on your PC, this installation is not performed. 8. Install ImageMixer VCD for FinePix as directed by the on-screen instructions. If the window shown below appears, click the [OK] button to uninstall the software. Install WINASPI as directed by the on-screen instructions. 3 Check the installation destination folder and then click the [Next >] button. 4 The "Confirmation" screen shown may appear. To continue with the settings, click the [Yes] button. Click the [Agree] button in the "Software License Agreement" window. 11. Install Windows Media Player as directed by the on-screen instructions and then restart your PC. If the latest version of the software is already installed on your PC, this installation is not performed. When next screen appears, click the [Restart] button. 4. Install FinePixViewer. 1 FinePixViewer installation begins and notes and warnings are displayed. When you have confirmed these, click the [Next >] button. 2 The User License Agreement for this software is displayed. Read the agreement carefully and then, if you agree to the terms of the Agreement, click the [Yes] button. If you click the [No] button, the software is not installed. In Windows Media Component Setup window, tick the "I have read the Privacy Statement" checkbox and then click the [Next >] button. When you click the [Finish] button, your PC is restarted. 6 If the "Connection speed" window appears, set the correct speed for your environment of connection and then click the [Next] button. If you do not know your connection speed, simply click the [Next] button. 78 79 12. After you restart your PC, install DirectX as directed by the on-screen instructions and then restart your PC again. [. . . ] Should Media not meet the foregoing warranty, FUJIFILM shall replace such defective Media with other Media bearing no defect. FUJIFILM's entire liability and your sole and exclusive remedy with regard to any defect in Media shall be expressly limited to such FUJIFILM's replacement of Media as provided herein 6. EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES PRODUCT "AS IS" AND WITHOUT WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS, INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY COPYRIGHT, PATENT, TRADE SECRET, OR ANY OTHER PROPRIETARY RIGHTS OF ANY THIRD PARTY, MARCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. [. . . ]