User manual FUJIFILM FINEPIX HS10

[. . . ] YF00623-120 EN DIGITAL CAMERA Before You Begin First Steps Basic Photography and Playback More on Photography More on Playback Movies Connections Menus Technical Notes Troubleshooting Appendix FINEPIX HS10 Owner's Manual Thank you for your purchase of this product. This manual describes how to use your FUJIFILM FinePix HS10 digital camera and the supplied software. Be sure that you have read and understood its contents before using the camera. For information on related products, visit our website at http://www. fujifilm. com/products/digital_cameras/index. html For Your Safety IMPORTANT SAFETY INSTRUCTIONS · Read Instructions: All the safety and operating instructions should be read before the appliance is operated. · Retain Instructions: The safety and operating instructions should be retained for future reference. [. . . ] Recommended when the background is much brighter or darker than the main subject. Exposure is set to the average for the entire frame. Provides consistent exposure across multiple q shots with the same lighting, and is particularly effective for landscapes and portraits of subjects (AVERAGE) dressed in black or white. 49 Autofocus Mode To choose how the camera selects the focus area when K is selected for focus mode (pg. 51), press the AF button and rotate the command dial. Note that regardless of the option selected, the camera will focus on the subject in the center of the monitor when macro mode is on (pg. 37). AF MODE + CENTER The following options are available: · r (CENTER): The camera fo- M cuses on the subject in the center of the frame. This option can be used with focus 250 lock. · s (MULTI): When the shutter button is pressed halfway, the camera detects highcontrast subjects near the center of the frame and selects the focus area automatically. · t (AREA): The focus position SELECT AF AREA can be chosen manually by pressing the selector up, down, left, or right and pressSET Focus target CANCEL ing MENU/OK when the focus brackets are in the desired position. Choose for precise focus when the camera is mounted on a tripod. · x (TRACKING): Position the M subject in the focus target and press the selector left. START TRACKING The camera will track the 250 F4. 5 subject and adjust focus as it moves through the frame. F4. 5 Focus frame 50 Focus Mode To choose how the camera focuses, press the AF C/S/M button and rotate the command dial. FOCUSING + CONTINUOUS AF The following options are available: Description Focus locks while the shutter button is pressed halfway. The camera continually adjusts focus to reflect changes in the distance to the subject even when the shutter button is not pressed halfway (note that this increases the drain on the batteries). J (continuous) r (CENTER) is automatically selected for autofocus mode (pg. 50); if Intelligent Face Detection is on, the camera will continually adjust focus for the selected face. Rotate the ring left to reduce the focus distance, right to increase. The manual focus indicator indicates how closely the focus distance matches the distance to the subject in the focus brackets. Choose for manual control of focus or in situations in which the camera is unable to focus using autofocus (pg. Intelligent Face Detection turns off automatically. j (manual) P Manual focus mode icon Manual focus indicator Reduce focus distance Increase focus distance Mode K (single) More on Photography 51 Focus Mode a Notes: Manual Focus · Use of a tripod is recommended. Focus may be affected if the camera moves. · If ON is selected for l FOCUS CHECK in the setup menu (pg. 112), the center of the display will be magnified to assist focus when the focus ring is rotated. [. . . ] 2 m (6. 6 ft. )­infinity (wide angle); 5 m (16. 4 ft. )­infinity (telephoto) · Macro: approx. (wide angle); 2 m­5 m/6. 6 ft. ­16. 4 ft. (telephoto) · Super macro: approx. Sensitivity Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200, 6400; AUTO, AUTO (400), AUTO (800), AUTO (1600), AUTO (3200) Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE Exposure control Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; manual exposure Exposure compensation ­2 EV ­ +2 EV in increments of 1/3 EV (P, S, A, and C modes) System Model Effective pixels Image sensor Storage media File system 130 Specifications System Scene modes C (NATURAL & N), D (NATURAL LIGHT), L (PORTRAIT), Z (PORTRAIT ENHANCER), M (LANDSCAPE), N (SPORT), O (NIGHT), H (NIGHT (TRIPOD)), P (FIREWORKS), Q (SUNSET), R (SNOW), S (BEACH), U (PARTY), V (FLOWER), W (TEXT) Picture stabilization Intelligent Face Detection Shutter speed (combined mechanical and electronic shutter) Continuous Optical stabilization (image sensor shift) Available · H: 4 s­1/1, 000 s · P: 4 s­1/2 s · O: 1/8 s­1/1, 000 s · P, S, A: 4 s­1/4, 000 s · M: 30 s­1/4, 000 s · Other modes: 1/4 s­1/4, 000 s · J: max. [. . . ]