User manual FUJIFILM FINEPIX HS50EXR

[. . . ] BL01901-100 EN DIGITAL CAMERA FINEPIX HS50EXR Owner’s Manual Thank you for your purchase of this product. This manual describes how to use your FUJIFILM digital camera and the supplied software. Be sure that you have read and understood its contents and the warnings in “For Your Safety” (P ii) before using the camera. Before You Begin First Steps Basic Photography and Playback More on Photography More on Playback Movies Connections For information on related products, visit our website at http://www. [. . . ] Focus check • Press the focus-assist button to magnify the view for checking focus. If ON is selected for j FOCUS CHECK in the setup menu (P 94), rotating the focus ring also magnifies the view. € The outlines with the most contrast at the current focus distance can be viewed by selecting FOCUS PEAK HIGHLIGHT for c MF ASSIST (P 85). To switch between FOCUS PEAK HIGHLIGHT and STANDARD, press and hold the focus-assist button. 48 Focus Frame Selection When S is selected for focus mode and t AREA is selected for F AF MODE in the shooting menu, the camera offers a choice of focus points. To position the focus frame, press the focus-assist button and then press the selector up, down, left, or right (the focus frame can be returned to the center by pressing DISP/BACK). Press MENU/OK to put the setting into effect. SELECT AF AREA SET Focus target CANCEL More on Photography a When F FOCUS AREA in the shooting menu is selected, you can also change the focus position by pressing MENU/OK and then using the selector button. c Disable intelligent face detection (P 52) when using manual focus frame selection. 49 The Q (Quick Menu) Button Press Q for quick access to the following items. For more information on the options available, see the pages listed below. To display the quick menu during the selector to highlight 2 Use command dial to change. Items and rotate the SET 3 Press Q to exit when settings are complete. 97 50 The Fn Button The role played by the Fn button can be selected using the F Fn BUTTON option in the shooting menu (P 79). The following options are available: ISO (P 80)/IMAGE SIZE (P 80)/IMAGE QUALITY (P 81)/DYNAMIC RANGE (P 81)/ FILM SIMULATION (P 82)/WHITE BALANCE (P 46)/PHOTOMETRY (P 83)/AF MODE (P 84)/FACE DETECTION (P 83)/INTELLIGENT DIGITAL ZOOM (P 83)/MOVIE MODE (P 64)/ELECTRONIC LEVEL (P 86)/DUAL IS MODE (P 98) a The F Fn BUTTON menu can also be displayed by pressing and holding the Fn button. More on Photography Fn button 51 b Intelligent Face Detection Intelligent Face Detection allows the camera to automatically detect human faces and set focus and exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for group portraits (in horizontal or vertical orientations) to prevent the camera from focusing on the background. To use Intelligent Face Detection, press MENU/OK to display the shooting menu and select ON for b FACE DETECTION. Faces can be detected with the camera in vertical Green border or horizontal orientation; if a face is detected, it will be indicated by a green border. If there is more than one face in the frame, the camera will select the face closest to the center; other faces are indicated by white borders. C • In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject. € If the subject moves as the shutter button is pressed, their face may not be in the area indicated by the green border when the picture is taken. [. . . ] 4 ×/2 × with intelligent digital zoom (up to 59 ×/84 × when combined with optical zoom) Lens Fujinon 42 × optical zoom lens, F/2. 6–F11 (telephoto) in increments of 1/3 EV; can be set manually or automatically Focus range (distance from • Approx. Sensitivity Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200, 6400 (image size P or Q), 12800 (image size Q); AUTO, AUTO (400), AUTO (800), AUTO (1600), AUTO (3200) 116 Specifications System Metering Exposure control Exposure compensation Picture stabilization Shutter speed (combined mechanical and electronic shutter) Continuous 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE Programmed AE (with program shift), shutter-priority AE, aperture-priority AE, and manual exposure –2 EV – +2 EV in increments of 1/3 EV (except B, R, M, and U) Optical stabilization, lens shift • O: 1/4 s–1/1, 000 s • H: 3 s–1/1, 000 s • U: 4 s–1/2 s • P, S, A: 4 s–1/4, 000 s • M: 30 s–1/4, 000 s • Other modes: 1/4 s–1/4, 000 s • I: max. 5 frames ; frame rate can be selected from 6. [. . . ]