User manual FUJIFILM FINEPIX S8100FD

[. . . ] Getting Ready Using the Camera Advanced Features · Photography · Playback OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix S8100fd correctly. Please follow the instructions carefully. · Movie Settings Camera Connection Software Installation Appendices Troubleshooting BL00730-200(1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in Canada CAUTION This Class B digital apparatus complies with Canadian ICES-003. For customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please read the Safety Notes (separate note "Notes and Cautions") and make sure you understand them before using the camera. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] Select this menu to erase all the frames (files). Page [ IMAGE DISP. ] [1. 5 SEC] 114 q[ FRAME NO. ] [CONTINUOUS] 115 [ [ [ [ AF ILLUMINATOR] DIGITAL ZOOM] EVF/LCD MODE] DATE/TIME] [ON] [OFF] [30fps] ­ 34 116 ­ 24 ­ ­ 116 117 117 [ OPERATION VOL. ] [ [ SHUTTER VOLUME] PLAYBACK VOLUME] [ LCD BRIGHTNESS] [ FORMAT] 112 How to use the [SET-UP] menu (p. 111) Setting Display Factory default Explanation Page [ ] [ENGLISH] Specifies the language used for screen display. 25 [ [ AUTO POWER OFF] TIME DIFFERENCE] BACKGROUND COLOR] DISCHARGE] VIDEO SYSTEM] [5 MIN]/[2 MIN]/[OFF] N/I [2 MIN] N Sets the time of turning camera off when camera is not used. Specifies the colors of menu, background, the boxes of Zoom bracketing, the box of Instant Zoom and so on. Specifies whether video output is set to [NTSC] or [PAL]. Resets all the camera settings (other than the [DATE/TIME], [TIME DIFFERENCE], [BACKGROUND COLOR], and [VIDEO SYSTEM]) to the factory default values set at shipment. A confirmation message appears when you press q. To reset the camera settings, press p or q to select [OK] and press MENU/OK. 118 118 [ ­ ­ [NTSC]/[PAL] ­ ­ ­ ­ Settings 138 ­ [ [ [ RESET] ­ ­ ­ Continued Q 113 [U SET-UP] How to use the [SET-UP] menu (p. 111) Z Enlarging images ZOOM (CONTINUOUS) CONTINUOUS) [IMAGE DISP. ] Use this setting to specify the way for displaying the check image screen (photograph result) after taking a picture. [CONTINUOUS]: The results are always displayed after you shoot. Press the MENU/OK to take another picture. Navigation screen (Current displayed image) NEXT SHOOTING [3 SEC]/[1. 5 SEC]: The image appears for about 3 or 1. 5 seconds and is then recorded. [ZOOM (CONTINUOUS)]: The image appears enlarged. Use this mode to check details of image. CAUTION · The color tones in images displayed when [3 SEC] or [1. 5 SEC] is selected may differ slightly from those in the images actually recorded. · [IMAGE DISP. ] cannot be used when [h LONG PERIOD] (p. 70) is set. A Turn to W or T to zoom in or out of an image. B Press n, o, p, or q to display another part of the image. C Press MENU/OK to take another picture. MEMO · When ` quality setting is selected, the image cannot be enlarged. · Pressing DISP/BACK cancels the zoom setting. · This function is disabled when setting the continuous shooting. · This function is disabled when selecting . MEMO When a result is displayed with [CONTINUOUS] set, overexposed areas in an image can be checked by pressing D. Intelligent Face Detection Images taken with the Intelligent Face Detection (p. 29). Press (Intelligent Face Detection) to alternate between the displayed faces. Turn the zoom lever to T or W to zoom in or out the selected face. Press n, o, p or q to display another part of the image. 114 How to use the [SET-UP] menu (p. 111) [FRAME NO. ] Use this function to specify whether frame numbers are assigned consecutively from previous numbers or begin again. [. . . ] Do not use 3 Notes on both models ( 1 , 2 ) charged and discharged batteries together. · Do not use different types or brands of batteries at AC Power Adapter the same time. Always use the AC Power Adapter (sold separately) · If you do not intend to use the camera for a long with the camera. The use of an AC Power adapter period of time, remove the batteries from the other than FUJIFILM AC Power Adapter (sold camera. [. . . ]