User manual FUJIFILM FINEPIX Z200 FD

[. . . ] Getting Ready Using the Camera Advanced Features · Photography · Playback OWNER'S MANUAL This manual will show you how to use your FUJIFILM DIGITAL CAMERA FinePix Z200fd correctly. Please follow the instructions carefully. · Movie Settings Camera Connection Software Installation Appendices Troubleshooting BL00752-201(1) Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in Canada CAUTION This Class B digital apparatus complies with Canadian ICES-003. For customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please read the Safety Notes (Basic Manual) and make sure you understand them before using the camera. Perchlorate Material-special handling may apply, See http://www. dtsc. ca. gov/hazardouswaste/ perchlorate. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] To set the time difference, select [I LOCAL]. [N HOME]: Your home time zone [I LOCAL]:Your destination time zone 12 / 31 / 2050 12 / 31 / 2050 10:00 AM 10:00 AM SET CANCEL A Select +/­, hour, and minute. B Change the setting. Continued Q 111 [U SET-UP] How to use the [SET-UP] menu (p. 102) C Always press MENU/OK after the settings are completed. CHECK Available time setting ­23:45 to +23:45 (in 15-minute increments) MEMO In the time difference setting, when you change to the Shooting mode, I and the date is displayed for 3 seconds, the date display turns yellow. 12 / 31 / 2050 11:00 AM CHECK Upon returning from a trip, always change the time difference setting back to [N HOME] and then check the date and time again. 112 Connecting to a TV When connecting to a TV, images can be displayed on wider screen. You can enjoy using the slide show function (p. 86) at parties and other gatherings. A Plug the A/V cable (included) into the multi-connector adapter connection socket on the camera. Video (yellow) To terminals Audio (white) B Plug the other end of the cable into the audio/video input socket on the TV. CAUTION · Plug the A/V cable (included) correctly and push it in the terminal. · See "Basic Manual" (included) for information on the AC power adapter. MEMO · When connecting the A/V cable (included) to TV, the LCD monitor is turned off. · The image quality for movie playback is lower than for still images. · When connecting to a TV, even if you adjust the volume from the [ PLAYBACK VOLUME], the TV volume cannot be changed. Refer to the instructions provided with your TV for more information on audio/video input for your TV. · Use the AC-5VX (sold separately) and CP-45 (sold separately) when FinePix Z200fd is connected to a TV for long periods. Camera Connection Camera Connection 113 Connecting Camera Directly to Printer -- PictBridge Function When a printer that supports PictBridge is available, images can be printed by connecting the camera directly to the PictBridgecompatible printer without a PC. 2 Connect the camera to a printer and turn the printer on. Press w for about 1 second to turn the camera on. USB Connecting to a printer [ USB] appears on the LCD monitor. 1 Connect the camera to your printer using the USB cable. 3 The following screen appears on the LCD monitor after a moment. "Specifying images for printing" p. 115 "Printing with DPOF setting" p. 116 SET PICTBRIDGE TOTAL : 00000 00 SHEETS MEMO Use the AC-5VX (sold separately) and CP-45 (sold separately) when FinePix Z200fd is connected to a printer. FRAME OK MEMO Depending on the printer, some functions are disabled. 114 Specifying images for printing (PRINT WITH DATEE / PRINT WITHOUT DATE) PICTBRIDGE TOTAL : 00002 PRINT THESE FRAMES TOTAL : 9 SHEETS YES CANCEL 02 SHEETS FRAME OK SET D Press MENU/OK again to download the data to the printer and start printing the specified number of prints. MEMO A Display the frame (file) for specifying PRINT setting. Even if MENU/OK is pressed with total number of images set at 0 (zero), the screen printing once appears on the LCD monitor. Press MENU/OK again and printing starts. B Set a value. To specify more PRINT settings, repeat steps A and B. C Press MENU/OK to display the confirm setting. MEMO Printing with date Camera Connection PICTBRIDGE PRINT WITH DATE PRINT WITHOUT DATE PRINT DPOF A Press DISP/BACK to display the setting display. C Press MENU/OK. CAUTION [PRINT WITH DATEE] is not available when the camera is connected to a printer that does not support date printing. 115 Connecting Camera Directly to Printer -- PictBridge Function Printing with DPOF setting ([u PRINT DPOF]) PICTBRIDGE PRINT WITH DATE PRINT WITHOUT DATE PRINT DPOF PRINT DPOF OK?TOTAL : 9 SHEETS YES CANCEL D Press MENU/OK again to download the data to the printer and start printing the specified frames (files) continuously. CHECK To select [u PRINT DPOF], the DPOF settings must be specified on FinePix Z200fd beforehand (p. 92). B Select [u PRINT DPOF]. CAUTION Even when [WITH DATEE] is specified in the DPOF settings (p. 92), the date is not inserted on printers that do not support date printing. C Press MENU/OK to display the confirm setting. 116 MEMO PRINTING MEMO DPOF setting can be specified for images on internal memory. CAUTION · In PictBridge function, images photographed on other than a camera may not be printed. · The camera cannot be used to specify printer settings such as the paper size and print quality. · Use internal memory or a Memory Card that was formatted on FinePix Z200fd. · Images photographed with a camera other than FinePix Z200fd may not be printed. CANCEL Press DISP/BACK to cancel the printing. Depending on the printer, the printing may not be canceled immediately or printing may stop midway through. When printing stops midway, press w to turn the camera off and then on again. Disconnecting the printer A Check that [PRINTING] is not displayed on the camera's LCD monitor. [. . . ] Do not use 3 Notes on both models ( 1 , 2 ) charged and discharged batteries together. · Do not use different types or brands of batteries at AC Power Adapter the same time. Always use the AC Power Adapter (sold separately) · If you do not intend to use the camera for a long with the camera. The use of an AC Power adapter period of time, remove the batteries from the other than FUJIFILM AC Power Adapter (sold camera. [. . . ]