User manual FUJIFILM FINEPIXVIEWER DP EDITOR

[. . . ] FinePixViewer DP Editor User's Guide This User's Guide contains the instructions for using the FinePixViewer and DP Editor software. Read this manual carefully before using these programs. FinePixViewer/ DP Editor IMPORTANT Be sure to read this page before using the Software Set. Notes on the Software and User's Guide (1) Unauthorized transfer or duplication of all or any part of the enclosed software or User's Guide is forbidden. (2) The enclosed software and User's Guide can be used with only one device. (3) We accept no liability whatsoever for any loss or injury incurred by the owner or any third party while using a device with the enclosed software or User's Guide. [. . . ] You can then print the image from this dialog box. Print dialog box [Center Image] check box: Click this box to position the printed image in the center of the paper. When this box is not checked, the image is printed in the top left corner of the page. [Adjust to paper size] check box: Click this check box to print the image so that it fills the page. When this box is not checked, the image is printed using the original image dimensions. [Adjust to paper size] option buttons: These options are available when the [Adjust to paper size] check box is checked. Windows [Date imprinting] checkbox: Click this checkbox to imprint the date on your image. · Print entire image at maximum size (margins added) This option prints the image enlarged or reduced with the aspect ratio maintained so that none of the image overlaps the page. The image is not trimmed. · Print entire printable area (image cropped) This option prints the image enlarged or reduced so that it fills the printable area on the page, while maintaining the aspect ratio of the image. Portions of the image that overlap the page are trimmed off. Macintosh * The [Print] dialog box displayed by the [Properties] button differs depending on the printer driver you are using. (Windows) * Items other than the [Center Image] check box, [Date imprinting] check box, [Adjust to paper size] check box and option buttons, the [Preview] button and the [Margins Setting] all vary depending on the printer driver you are using. 31 FinePixViewer Margins Setting button: Clicking this button opens the Margins Setting dialog box and allows you to set the size of the top, bottom, left and right margins. [Preview] button: Click this button to see a preview of the image to be printed. [Cancel] button: Click this button to stop printing and close the [Print] dialog box. [OK] button (Windows) or [Print] button (Macintosh): Click this button to start printing using the currently selected settings. TIP: (Macintosh) If you are imprinting the date using Mac OS 8. 5 or later, you can change the font used for imprinting by opening the "Appearance" Control Panel and changing the "Large System Font" setting in the "Fonts" tab. Margins Setting dialog box Macintosh Windows Margin 32 FinePixViewer Printing an index If you select several images and then select "Index Print" from the "File" menu, the "Index Print" dialog box for the connected printer opens. You can then use this dialog box to print an index of the images. Index Print dialog box Macintosh Windows Detailed Settings button: Clicking this button opens the Detailed Settings dialog box and allows you to specify whether the filename, date & time and comment are printed in the index print. [Number of Frames]: Specifies the number of frames vertically and horizontally. ] buttons to change the number of * The [Print] dialog box displayed by the [Properties] button differs depending on the printer driver you are using. (Windows) 33 FinePixViewer Margins Setting button: Clicking this button opens the Margins Setting dialog box and allows you to set the size of the top, bottom, left and right margins. [Preview] button: Click this button to see a preview of the images to be printed. [Cancel] button: Click this button to stop printing and close the [Index Print] dialog box. [OK] button (Windows) or [Print] button (Macintosh): Click this button to start printing using the currently selected settings. Detailed Settings button: Clicking this button opens the Detailed Settings dialog box and allows you to specify whether the filename, date & time and comment are printed in the index print. Detailed Setting dialog box Windows Print Items radio buttons: Use these to select the filename, photography date and time, or comment as the items to be printed. Macintosh Text on/off for Index print checkbox: When you tick this checkbox, the items selected using the print items radio buttons are printed in the index print. TIP: (Macintosh) If you are printing an index, you can change the font used for printing the text by opening the "Appearance" Control Panel and changing the "Large System Font" setting in the "Fonts" tab. 34 FinePixViewer Exiting FinePixViewer To exit FinePixViewer, select [Exif] (Windows) or [Quit] (Macintosh) from the [File] menu or click the [Close] button (Windows) or [Close] box (Macintosh) in the Main Window. 35 Ordering Prints (Using DP Editor) Starting Up DP Editor A. Startup using the Windows Start menu Startup using the DP Editor icon on a Macintosh Screen at startup Double-click [DP Editor]. Macintosh Windows From the Start menu, select [Programs][DP Editor]-[DP Editor]. B. Startup from FinePixViewer Select [Print Order] from the FinePixViewer [File] menu or click the [ ] button. NOTE: · Because the [Select Media] dialog box is displayed when the DP Editor starts up, load the media on which the ordering information is to be recorded (SmartMedia, floppy disk, MO disk, etc. ) into the appropriate drive before you start up DP Editor. · Remove any write protection from the media used by DP Editor. 36 DP Editor Selecting the Media The [Select Media] dialog box is displayed immediately after DP Editor starts up and when you select [Select Media] from the [File] menu. Use this dialog box to select the media on which the ordering information is to be recorded. [Select Media] dialog box Windows Macintosh Media display area: Displays all the drives currently connected to the PC. (Windows) Displays all the disks currently connected to the PC. (Macintosh) [OK] button: Select a media and click this button. The Main window then appears. [Cancel] button: Click this button to cancel media selection. If you click this button immediately after DP Editor starts up, DP Editor quits. 37 DP Editor Registering Ordering Information Main Window Once you select a media the Main window appears. Main window Open button: Save Button: Print Quantity Field: Windows Macintosh NOTE: If DPOF information is already recorded on the selected media, the index icons and thumbnails will appear in the window. 38 DP Editor Registering Images Selecting images A. [. . . ] media already contains a folder numbered 999. The number of orders There are too many Register using a new media. Cannot order registered standard prints any more. and index prints. 49 When Problems Arise Common Problems Troubleshooting Message Cause Solution This application The application will not run Upgrade to Windows 98 or requires Windows 98 because your version of later. [. . . ]