User manual FUJIFILM FUJI INSTAX SHARE SP-2 GOLD

[. . . ] 39 After reading this User’s Guide, keep it in a safe, easy to find place where you can refer to it if needed. 29 Parts Name 1 8 EN 2 3 4 5 10 6 7 9 1 2 3 30 4 Print exit POWER button REPRINT button USB connector cover 5 6 7 8 USB connector Film remaining LED Battery remaining LED Back cover lock 9 10 Back cover Battery cover Before Use Before using the printer, install the instax SHARE application on your device. € When you are using an Android OS device, search for “instax SHARE” in the Google Play, then install the application. € When you are using an iOS device, search for “instax SHARE” in the App Store, then install the application. [. . . ] 44 Printed pictures Problems Part or whole finished print is white. Possible Causes ● The back cover was opened before you have used up the film. 1 Pressure was applied to the picture immediately after it came out from the printer. 2 The picture did not come out smoothly. — The printer shakes or has been dropped and the film has become misaligned. Solutions ● Do not open the back cover until you have used up the film; otherwise, the rest of the film may be exposed and ruined for use. 1 Do not shake, bend, fold, or press the print. EN A black line is printed on the bottom of the finished print. If this does not solve the problem, load a new film pack. 45 IMPORTANT SAFETY NOTICE This product has been designed with safety in mind, and to provide safe service when handled correctly and in accordance with the User’s Guide and instructions. It is important that both the product and the INSTAX film are handled properly and used only to print pictures as instructed in this User’s Guide and in the INSTAX mini film instructions. For your ease and safety, please follow what is written in this User’s Guide. It is also a good idea to keep this User’s Guide in a safe, easy to find place where you can refer to it if needed. WARNING If the printer (or batteries) becomes hot, emits smoke or a burnt smell or otherwise seems abnormal, immediately remove the batteries. Faults of this nature could start a fire and cause burns. (Take particular care to avoid burns when removing the batteries or pull out the USB cable. Do not move the printer while the USB cable is still connected to it. Doing so could damage the USB cable and cause a fire or electric shock. Keep out of the reach of small children. This product could cause injury in the hands of a child. Do not cover or wrap the printer or the AC power adapter in a cloth or blanket. This can cause heat to build up and distort the casing or cause a fire. [. . . ] –■ Notes on the Battery The battery gradually loses its charge when not in use. Charge the battery one or two days before use. Battery life can be extended by turning the printer off when not in use. Battery capacity decreases at low temperatures; a depleted battery may not function at when cold. [. . . ]