User manual FUJIFILM INSTAX SQUARE PHOTO FRAME

[. . . ] 36 After reading this User’s Guide, keep it in a safe, easy to find place where you can refer to it if needed. Indb 3 2017/5/19 16:29:28 Before Use EN Before using the camera, check the following. Supplied Accessories • NP-50 rechargeable battery (1) ~Make sure supplied accessories are included in the package. € USB cable for charging (1) Ÿ Read "IMPORTANT SAFETY NOTICE" (Page 32) and "Handling the ! [. . . ] (Page 21) • You can also use a shutter button to which you assign the shooting mode switch function on SHUTTER BUTTON SETTINGS. Press the button repeatedly to choose a shooting mode. FLASH ~ Press the MENU/OK button on the shooting screen. (Page 20) SELF-TIMER Select a setting when using the self timer. (Page 19) AF ILLUMINATOR If you select ON, the AF-assist illuminator lights up while focusing to assist auto focus when it is dark. Option: ON/OFF • The camera may be unable to focus using the AFassist illuminator in some cases. € When you are close to the subject, the AF-assist illuminator may not be as effective as you expect. € Avoid shining the AF-assist illuminator directly into your subject's eyes. Ÿ Select the setting item to change and change the setting. The LCD monitor returns to the shooting screen. Indb 24 2017/5/19 16:29:49 Menus Playback Menu Follow the steps below to specify/change the playback menu. Copy images in the camera's memory to a memory card and vice versa. 2 Select the destination, then press the MENU/OK button or 9. 3 Select FRAME or ALL FRAMES, then press the MENU/ OK button or 9. Copying starts if you select ALL FRAMES. 4 Select an image to copy, then press the MENU/OK button or 9. AUTOROTATE PB EN ~ Press the MENU/OK button on the playback screen. Ÿ Select the setting item to change and change the setting. The LCD monitor returns to the playback screen. – Items on the playback menu PRINT Press the MENU/OK button to start printing. (Page 16) PRINT HISTORY Display up to 50 images you printed in the past. Select an image, then press the MENU/OK button to start printing. [. . . ] Do not place the battery in direct contact with hand warmers or other heating devices. EN ■ Charging the Battery Charge the battery using the supplied USB cable. Charging times will increase at ambient temperatures below +10 °C (+50 °F) or above +35 °C (+95 °F). Do not attempt to charge the battery at temperatures above 40 °C (+104 °F); at temperatures below +5 °C (+41 °F), the battery will not charge. [. . . ]