User manual FUJITSU SIEMENS LIFEBOOK 544

[. . . ] Operating Manual System LIFEBOOK A544 LIFEBOOK AH544 LIFEBOOK AH564 Congratulations on your purchase of an innovative product from Fujitsu. The latest information about our products, tips, updates etc. Can be found on the Internet at: "http://www. Com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support. [. . . ] – To set the user password, select Set User Password and proceed exactly as when configuring the supervisor password. If you do not want to change any other settings, you can exit BIOS Setup Utility. – In the Exit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key. The notebook will be rebooted and the new password will come into effect. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Userpassword Supervisor Password password Fujitsu 41 Security functions Changing the supervisor or user password You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. User password Supervisorpassword Password ► Call the BIOS Setup Utility and go to the Security menu. – When changing the password, proceed exactly as for password assignment. Removing passwords To remove a password (without setting a new password) perform the following steps: User password Supervisorpassword Password ► Start the BIOS Setup Utility and go to the Security menu. – Highlight the Set Supervisor Password or Set User Password field and press the Enter key. You will be requested to enter the current password by the Enter Current Password prompt. You will be requested to enter a new password by the Enter New Password prompt. – In the Exit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key. The notebook will now reboot with the password removed. Removing the supervisor password simultaneously deactivates the user password. Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Setting supervisor and user password", Page 41), you can also prevent booting of the operating system. Operating system Activating system protection ► ► ► ► Operatingsystem Start the BIOS Setup Utility and go to the Security menu. Select the Password on Boot option and press the Enter key. Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key Select the Save Changes & Exit option under Exit. [. . . ] Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. Consult the dealer or an experienced radio/TV technician for help. Please note the following regulatory information related to the optional radio device. FCC Radio Frequency Exposure statement This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2. [. . . ]