User manual FUJITSU SIEMENS LIFEBOOK S

[. . . ] answers LIFEBOOK S Series English 2 EasyGuide Are there . . . . . . any technical problems or other questions which you would like to be clarified?Please contact: your sales partner your sales outlet Additional information is provided on the Help Desk list and in the "Warranty" manual (the "Warranty" manual is included on the "Drivers & Utilities" CD provided). The latest information on our products, tips, updates, etc. , can be found on the internet under: http://www. fujitsu-siemens. com Distributed by Fujitsu Siemens Computers GmbH Order No. : A26391-K144-Z120-1-7619 Edition 2 AG 0804 08/04 Introduction Troubleshooting and tips Important notes Technical data LIFEBOOK S Series Manufacturer's notes Index Preparing the notebook for use Operating manual Working with the notebook Security functions Connecting external devices Memory expansion Energy saving functions Settings in BIOS Setup August 2004 edition DPMS and VESA are registered trademarks of Video Electronics Standards Association. [. . . ] The Kensington MicroSaver is available as an accessory. 1 Fit the Kensington MicroSaver on the device (1) on your Port Replicator. Configuring and using Security Panel 1 2 3 4 Enter Security panel A26391-K144-Z120-1-7619, edition 2 51 Security functions Configuring Security Panel When you put your notebook into operation for the first time, the Security Panel is not activated yet. Assign the necessary passwords with the programs FJSECS. EXE (Supervisor password) and FJSECU. EXE (User password). These programs are ready for installation in the folder AddOn and are also provided on the "Drivers & Utilities" CD. You require the User password each time you want to start your notebook (or want to return to your working interface from the energy-saving mode). Should you forget your User password, you can unlock the notebook with the Supervisor password and assign a new User password. ! We recommend that you make a note of the security passwords and keep them in a safe place. If you should have forgotten both the User password and the Supervisor password you cannot start your notebook any more. In this case you must call our Help Desk. The deletion of security passwords is not a warranty case and is therefore subject to charge. Back up your data on external data carriers at regular intervals. To set the passwords, proceed in the following order: Assigning the supervisor password The setup programme can be found under Start - AddOn. or Enter the programme name FJSECS. EXE under Start - Run. Double-click on the symbol to start the setup programme for FJSECS. EXE. The programme starts. The programme starts. The program instructions will help you configure the password. You see a field with five lines and 4 keys each with the numbers 1 to 4 for selecting your password. You can select one number or a combination of several numbers in each line. Click one to four keys in the first line. You can also click a key or key combination in additional lines if desired. Here it is important that you do not skip a line. In the end your password consists of one to five numbers or one to five number combinations. i With a combination you must press the security keys with these numbers simultaneously later when entering the password. 52 A26391-K144-Z120-1-7619, edition 2 Security functions An example: Here the combination 2, 3 was selected in the first line, the number 4 in the second line, the combination 1, 3 and 4 in the third line, the number 2 in the fourth line and finally the combination 1, 2, 3 and 4 in the fifth line. In this case the supervisor password is then: 2/3 4 1/3/4 2 1/2/3/4 Assigning the user password The setup programme can be found under Start - AddOn. or Enter the programme name FJSECU. EXE under Start - Run. Double-click on the symbol to start the setup programme for FJSECU. EXE. [. . . ] Connect the equipment to an outlet on a circuit different from the one the receiver is connected to. Consult the dealer or an experienced radio/TV technician for help. Please note the following regulatory information related to the optional radio device. FCC Radio Frequency Exposure statement This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2. 1091, 2. 1093, and 15. 247 (b) (4) addressing RF Exposure from radio frequency devices. The radiated output power of this radio device is far below the FCC radio frequency exposure limits. [. . . ]