User manual FUJITSU SIEMENS PRIMERGY RX200 S6 BROCHURE

[. . . ] ENERGY STAR ® Power and Performance Data Sheet PRIMERGY RX200 S6 E-StarFam1 System Characteristics Form Factor Available Processor Sockets Available DIMM Slots / Max Memory Capacity ECC and/or Fully Buffered DIMMs Available Expansion Slots Minimum and Maximum # of Hard Drives Redundant Power Supply Capable? [. . . ] Closer approximations may be found by using established power calculators and specific information about the intended operating environment (e. g. , average time at Idle, data center PUE, etc. ). Power and Performance for Benchmark #1 Benchmark #1 Benchmark Used and Type of Workload Avg. Power Measured During Benchmark Run Benchmark Performance Score Power Performance Ratio (perf score/avg. power) Link to Full Benchmark Report (Where Available) Minimum 180, 8W 37, 56MPixel/s 0, 21MPixels/s / W N/A Typical 211, 5W 41, 8MPixel/s 0, 20MPixels/s / W N/A Maximum 300, 0W 41, 8MPixel/s 0, 14MPixels/s / W N/A SiSoftware Sandra Engineer 2009. SP4, . Net Multimedia, Double x1 Power Saving Features Processor Dynamic Voltage and Frequency Scaling Processor or Core Reduced Power States Power Capping Variable Speed Fan Control Based on Power or Thermal Readings Low Power Memory States Low Power I/O States Liquid Cooling Capability Enabled on Shipment End-User Enabling Required x x x Power and Temperature Measurement and Reporting Input Power Available & Accuracy?Input Air Temp Available & Accuracy?Other Data Measurements Available & Accuracy?Compatible Protocols for Data Collection Averaging method and time period IPMI Linear Average calculation / 5 sec. [. . . ] Airflow at Nominal Fan Speed (CFM) at Nominal Temp. Minimum 118 7 120m3/h 53m3/h Typical 220 12 118m3/h 53m3/h Maximum 312 20 97m3/h 42m3/h * References: ASHRAE Extended Environmental Envelope Final August 1, 2008 Thermal Guidelines for Data Processing Environments, ASHRAE, 2004, ISBN 1-931862-43-5 Peak temperature is defined as 35 °C, Nominal Temperature is defined as 18 - 27 °C [. . . ]