User manual FUJITSU SIEMENS SCENIC L (I815EP)

[. . . ] Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr. /Order No. : A26361-D1184-Z180-1-7619 Printed in the Federal Republic of Germany AG 0600 06/00 A26361-D1184-Z180-1-7619 System Board D1184 Additional Technical Manual June 2000 edition Intel, Pentium and Celeron are registered trademarks and MMX and OverDrive are trademarks of Intel Corporation, USA. [. . . ] PS/2 is a registered trademark of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright ã Fujitsu Siemens Computers GmbH 2000 All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Right of technical modification reserved. Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FCC Class B Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Mechanics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Serial chipcard reader or internal serial port 2 (COM 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Front panel connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Fan 2 connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 USB chipcard reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Wake On LAN (WOL) connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 CD-ROM audio connector (internal). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Auxiliary (MPEG, TV) audio connector (internal). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Fan 1 connector. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Power supply monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Intrusion connector for case open detect for optional push-button (opener) . . . . . . . . . . . . . . . . . . . . . . . 9 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Functions controlled by the configuration switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 USB power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Power requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Power loadability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices. Failure to do so may violate FCC rules. A26361-D1184-Z180-1-7619 English - 1 Features Features The table shows two assembly versions of this system board as example. Function Processor socket Processor Formfactor Front Side Bus in MHz Chipset Memory sockets ISA slots PCI slots ISA/PCI shared AGP Port AMR Port System monitoring Thermal Management Wake On LAN Chipcard reader Save to Disk (ACPI S4) Save to RAM(ACPI S3) LAN onboard Audio onboard VGA onboard 133 MHz Display Cache Version D1184-A1X PGA 370 Intel Celeron or Pentium III ATX 66/100/133 815 3 DIMM -5 -1 1 x x x x x x x AD1881A i 815 -Version D1184-B1X PGA 370 Intel Celeron or Pentium III ATX 66/100/133 815 3 DIMM -5 -1 1 x x -x x x -AD1881A i 815 -- ! Computer system boards and components contain very delicate IC chips. To protect them against damage caused from electric static, you have to follow some precautions: · · · Unplug your computer when you work inside. Hold components by the edge, don't touch their leads. Use a grounded wrist strap. Place the system board and the components on a grounded antistatic pad whenever you work outside the computer. Once you have installed the system board, you should remove the battery protection (i. e. the thin plastic plate between battery and contact spring). 2 - English A26361-D1184-Z180-1-7619 Mechanics Mechanics Layout ATX 12" x 8'' (304. 8 mm x 203. 2 mm) Some of the following connectors are optional and may therefore not be included on your system board. DIMM 3 DIMM 2 DIMM 1 AGP PCI 4 PCI 1 PCI 2 PCI 3 PCI 5 1 3 5 6 7 8 2 4 9a 9b9c 1= 2= 3= 4= 5= 6= PS/2 mouse port PS/2 keyboard port LAN port USB ports 1 and 2 Serial port 1 Parallel port 7 = VGA port 8 = Game/Midi port 9a = Audio Line-Out 9b = Audio Line-In 9c = Audio Micro-In The components and connectors marked do not have to be present on the system board. AMR A26361-D1184-Z180-1-7619 English - 3 Mechanics 1 23 4 5 6 7 17 16 DIMM 3 DIMM 2 DIMM 1 8 9 10 AGP 15 14 PCI 4 PCI 1 PCI 2 PCI 3 PCI 5 13 12 11 1 = Serial chipcard reader interface or serial port 2 2 = Power supply 3 = IDE drives 3 and 4 (secondary) 4 = Floppy disk drive 5 = IDE drives 1 and 2 (primary) 6 = Front panel connector (power switch, LED, loudspeaker) 7 = Configuration switch 8 = Fan 2 (e. for the processor) 9 = USB chipcard reader 10 = Wake On LAN 11 = CD audio input 12 = AUX Audio Input 13 = USB power jumper 14 = Voltage indicator LED 15 = Fan 1 (e. [. . . ] for the processor) 16 = Power supply monitoring 17 = Intrusion monitoring The components and connectors marked do not have to be present on the system board. 4 - English A26361-D1184-Z180-1-7619 AMR Mechanics Connectors ! Some of the following connectors are optional! Serial chipcard reader or internal serial port 2 (COM 2) external via optional cable 2 1 Pin 1 3 5 7 9 11 13 15 Signal DCD 2 SIN 2 SOUT 2 DTR 2 GND Not connected RESET (high asserted) GND Pin 2 4 6 8 10 12 14 16 Signal DSR 2 RTS 2 CTS 2 PC_On_Strobe VCC Auxiliary VCC GND Key A26361-D1184-Z180-1-7619 English - 5 Mechanics Front panel connector Power On/Off Reset 1) Message LED 1) 1) 1) 3) HD-LED Power On LED 1 2 1) Sleep SCSI LED Input 1) 2) Speaker 2) 1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible Pin 1 3 5 7 9 11 13 15 17 19 21 23 25 272) 29 Signal Not connected Standby LED (Anode) Key PON_LED (Anode) PON_LED (Anode) PON_LED (Cathode/GND) Standby LED (Cathode/GND) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) Sleep button (low asserted) Reset button (low asserted) Pin 2 4 6 81) 10 12 14 16 18 20 22 24 26 28 30 Signal Speaker Key GND VCC or GND Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND 1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI). 6 - English A26361-D1184-Z180-1-7619 Mechanics Fan 2 connector 1 Pin 1 2 3 Signal GND +12 V Fan sense USB chipcard reader 1 2 Pin 1 3 5 7 9 11 13 Signal P3V3P_DUAL Data negative up Data negative down GND Not connected P3V3P Chipcard reader On (low pulse) Pin 2 4 6 8 10 12 14 Signal VCC Data positive up Data positive down GND VCC auxiliary Power OK (high asserted) Key Wake On LAN (WOL) connector 1 Pin 1 2 3 Signal VCC Auxiliary GND Wake pulse (high asserted) A26361-D1184-Z180-1-7619 English - 7 Mechanics CD-ROM audio connector (internal) 1 Pin 1 2 3 4 Signal Left CD audio input CD GND CD GND Right CD audio input Auxiliary (MPEG, TV) audio connector (internal) 1 Pin 1 2 3 4 Signal Left AUX audio input Analog GND Analog GND Right AUX audio input 8 - English A26361-D1184-Z180-1-7619 Mechanics Fan 1 connector 1 Pin 1 2 3 Signal GND Controlled fan voltage (0 V / 6. . . 12 V) Fan sense Power supply monitoring 1 Pin 1 2 3 4 5 6 7 8 Signal Monitor on PS FAN off request (low asserted) PS FAN full on (low asserted) PS FAN pulse SMB CLK SMB DATA VCC EEPROM GND Intrusion connector for case open detect for optional push-button (opener) 1 Pin 1 2 3 Signal GND Case open (low asserted) Intrusion switch present (low asserted) A26361-D1184-Z180-1-7619 English - 9 Mechanics Configuration Functions controlled by the configuration switch Function Password skip Off Recovery BIOS Off Floppy write protect Off RTC - Reset and Clear CMOS Off *) Must be in "off" state. [. . . ]